Intermatic
Intermatic LC4521LA photocontrol twist-lock 120V AC dusk-to-dawn switch
Twist-lock photocontrol switches 120 V AC loads up to 1,000 W at dusk and off at dawn
- TypeLight Switch
- Color MappingTranslucent/Gray
- Dusk-to-dawn automation activates at 0.5 foot-candles
- Turn-lock mounting fits standard photocontrol receptacles
- Rated 15 A incandescent and 8.3 A ballast loads
- Operates from -40 °F to 158 °F in raintight housing
- Certified to ANSI C136.10, cCSAus and UL standards
Photocontrol for dusk-to-dawn operation
The Intermatic LC4521LA is a twist-lock photocontrol designed for outdoor lighting circuits that must switch automatically at dusk and dawn. It mounts on a standard turn-lock receptacle and carries a raintight polypropylene enclosure rated for temperatures from -40 to 158 degrees Fahrenheit.
1000-watt capacity with 15-amp incandescent rating
The unit handles up to 1000 watts and 15 amps of incandescent load or 8.3 amps of ballast load, making it suitable for most residential and light-commercial fixtures. It turns on at 0.5 foot-candles and off at 15 foot-candles, so very bright ambient light will keep the circuit open.
ANSI C136.10 twist-lock base
The twist-lock mounting follows the ANSI C136.10 standard and is listed to cCSAus, UL and California Title 20 requirements. Buyers whose fixtures use a different base type or who need a voltage other than 120 V AC cannot use this part.
Highlights
- Dusk-to-dawn automation activates at 0.5 foot-candles
- Turn-lock mounting fits standard photocontrol receptacles
- Rated 15 A incandescent and 8.3 A ballast loads
- Operates from -40 °F to 158 °F in raintight housing
- Certified to ANSI C136.10, cCSAus and UL standards
Specifications
| Type | Light Switch |
|---|---|
| Brand | Intermatic |
| Color Mapping | Translucent/Gray |
Questions about this item
Will the LC4521LA twist-lock photocontrol fit my existing ANSI C136.10 receptacle on a 120V circuit?
Yes — the LC4521LA uses a standard ANSI C136.10 twist-lock base and is rated for 120V AC, so it locks directly into compatible receptacles on a 120V supply.
How can I verify the LC4521LA is switching at the correct light levels after installation?
Cover the translucent/gray sensor; the load should turn on. Expose it to bright light (above 15 foot-candles); the load should turn off. The SPST contact opens at 15 fc and closes at 0.5 fc.
Does the LC4521LA package include a mounting receptacle or wiring pigtails, or must I buy them separately?
The supplier notes "Includes Not Applicable", so no receptacle, pigtails or mounting hardware are supplied. You must provide a compatible ANSI C136.10 twist-lock receptacle and wiring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



