Interex By Tripp-Lite
Interex By Tripp-Lite N820-07M 7M 10Gb Duplex MMF OM3 50-125 computer power cord
7 m duplex OM3 multimode fibre cable with LC/LC connectors for 10 Gb Ethernet links
- 7 metre reach fits standard rack layouts
- 10 Gb Ethernet support for high-speed links
- OM3 laser-optimised fibre triples bandwidth over 62.5 µm cable
- 50/125 µm core/cladding matches modern transceiver specs
- LC duplex connectors enable simple patch-panel termination
Product identity
The Interex By Tripp-Lite N820-07M is a 7 metre duplex multimode fibre patch cable built for 10 Gb Ethernet links. It targets network engineers and integrators who need reliable short-range connectivity between switches, servers or transceivers.
Sustained operation
OM3 laser-optimised 50/125 µm fibre supports continuous 10 Gb serial transmission over extended distances without the bandwidth limits of legacy 62.5 µm cable. The aqua jacket identifies the OM3 rating for quick visual verification in dense patch panels.
Installation reality
LC/LC connectors snap into standard SFP+ or QSFP+ ports, but the glass core demands clean end-faces; any dust or oil on the ferrules will degrade the link. Bend radius must be respected during routing because tight bends fracture the fibre and cause permanent signal loss.
Highlights
- 7 metre reach fits standard rack layouts
- 10 Gb Ethernet support for high-speed links
- OM3 laser-optimised fibre triples bandwidth over 62.5 µm cable
- 50/125 µm core/cladding matches modern transceiver specs
- LC duplex connectors enable simple patch-panel termination
Specifications
No published specifications for this item yet.
Questions about this item
Does the 7 m duplex OM3 cable generate any heat or draw power during continuous 10 Gb operation?
No, the passive fibre assembly carries light only and produces no heat or power draw.
What connectors must my existing equipment provide for the LC/LC ends on this 50/125 µm cable?
Both devices need LC duplex ports compatible with 50/125 µm multimode fibre.
Will the OM3 aqua jacket cable work with the 62.5 µm multimode patch panels I already have?
Mixing 50/125 µm OM3 with 62.5 µm legacy cable is not recommended because core-size mismatch increases insertion loss.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



