InterDynamics A/C Pro Car Air Conditioner Test Thermometer White
Diagnoses car air-conditioning performance by measuring outlet duct and ambient temperatures up to 220 degrees Fahrenheit with a magnified dial and protective probe cover
- ColorWhite
- Diagnose AC performance with a dedicated test thermometer
- Check outlet duct and ambient temperatures for accurate readings
- Magnified 1-inch dial and 5-inch probe simplify use
- Reads 0 to 220 degrees Fahrenheit for full range
- Includes holder and clip for convenient mounting
Car AC Diagnostic Thermometer
This certified thermometer helps vehicle owners diagnose air-conditioning performance by measuring outlet duct and ambient temperatures. It is designed for anyone who wants a quick, tool-free way to verify that their car's AC system is cooling effectively. The white dial and protective probe cover make readings straightforward in a garage or driveway setting.
Thermals Noise Power
The instrument operates passively with no batteries, electronics or moving parts, so it produces no noise and draws no power. Its mechanical dial reads from 0 to 220 degrees Fahrenheit, giving an immediate temperature indication without warm-up time or calibration drift. Because there are no active components, thermal behaviour is limited to the probe responding to the air stream being measured.
Build Quality Mounting
A magnified one-inch dial and a five-inch probe with a protective cover are built for repeated use under the bonnet. The supplied holder and clip allow the thermometer to be secured to a vent or grille, freeing both hands while the engine runs. The simple mechanical construction means there are no seals, screens or firmware to degrade over time.
Highlights
- Diagnose AC performance with a dedicated test thermometer
- Check outlet duct and ambient temperatures for accurate readings
- Magnified 1-inch dial and 5-inch probe simplify use
- Reads 0 to 220 degrees Fahrenheit for full range
- Includes holder and clip for convenient mounting
Specifications
| Color | White |
|---|
Questions about this item
How do I position the 5 inch probe in the outlet duct so the 1 inch dial reads correctly?
Insert the probe into the centre of the duct with the dial facing outward, then secure it with the supplied holder and clip so the thermometer cannot shift while the engine runs.
What part of the thermometer will need replacement after repeated exposure to 220 Degrees Fahrenheit?
The protective cover on the probe can become brittle over time; keep a spare cover on hand so the probe tip stays shielded.
At what temperature does the dial stop giving useful readings during a long AC test?
The scale ends at 220 Degrees Fahrenheit, so sustained temperatures above that point exceed the instrument's range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
