Intellinet Network Solutions
Intellinet Network Solutions Cat6 UTP RJ45 Male / RJ45 Male 0.5 ft Orange network ethernet cable
Cat6 UTP patch cable with gold-plated RJ45 connectors, snagless boots and strain relief in a 0.5 ft orange length
- TypeNetwork Ethernet Cables
- Cat6
- Connector ARJ45
- Connector BRJ45
- Length0.5 ft.
- ColorOrange
- Cat6 rating supports gigabit network speeds
- Gold-plated contacts resist corrosion for reliable signal
- Snag-free boots protect tabs during installation
- Strain-relief design reduces cable fatigue at connectors
- Lifetime warranty backs long-term performance
run patch cable
This Intellinet Cat6 UTP cable measures 0.5 ft and terminates in gold-plated RJ45 male connectors on both ends. The orange jacket makes it easy to identify in a crowded patch panel or desk run. Snag-free boots and moulded strain relief protect the latch and the cable junction during repeated insertion.
Ideal for tight jumpers
The 0.15 m length suits cross-connects between a switch and a patch panel or a wall jack and a nearby device. Builders who need a longer horizontal run or a shielded cable for noisy environments should look at other options.
Cat6 UTP rating
The cable carries a Category 6 unshielded twisted-pair rating with impedance-matched construction and gold-plated contacts. It is tested to the relevant standards and backed by a lifetime warranty.
Highlights
- Cat6 rating supports gigabit network speeds
- Gold-plated contacts resist corrosion for reliable signal
- Snag-free boots protect tabs during installation
- Strain-relief design reduces cable fatigue at connectors
- Lifetime warranty backs long-term performance
Specifications
| Brand | Intellinet Network Solutions |
|---|---|
| Type | Network Ethernet Cables |
| Cat | 6 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 0.5 ft. |
| Color | Orange |
| Shielded | No |
Questions about this item
What spacing do the two RJ45 plugs need on a patch panel?
Each end uses a standard RJ45 male plug, so the cable fits any 0.5 ft patch-panel port spacing without adapters.
Which side of the tab should face up when pushing the plug into a switch port?
Hold the plug with the snagless boot tab on top, press straight in until the latch clicks, then tug gently to confirm lock.
When should the cable be replaced if the gold contacts oxidise?
Gold plating resists oxidation, but replace the cable if the latch breaks, the boot splits, or intermittent link errors appear.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



