We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rackmount switch with 48 RJ45 ports and 6 SFP+ uplinks

Intellinet Network Solutions

Intellinet Network Solutions 54-Port Managed PoE+ Switch 48×GbE 6×SFP+ 450W

SKU CH-ZGPT-SG7SS

A 54-port managed PoE+ switch delivering 450 watts across 48 Gigabit ports with six 10G SFP+ uplinks and self-healing PDM

  • FormatRackmount
  • Network Management TypeManaged
  • Uplink Ports6
  • Uplink InterfaceSFP
  • Uplink SpeedSFP+
  • Primary Ports48 x RJ45
  • Powers up to 48 PoE devices with a 450 W budget
  • Six 10 Gbps SFP+ uplinks for high-speed backbone links
  • PDM self-healing restarts unresponsive PoE endpoints automatically
  • Cloud-ready management via Domotz platform
  • 12 KB jumbo frames and 2 MB buffer handle bursty traffic

54-Port PoE+ Switch for Medium Businesses

This 54-port fully managed switch delivers 48 Gigabit Ethernet ports and six 10G SFP+ uplinks. It supplies up to 450 watts of PoE+ power budget with a maximum of 30 watts per port. The Layer 2+ feature set includes VLAN, QoS, LACP and IGMP for traffic control. It targets installers building medium-sized networks that need both density and uplink bandwidth.

Sustained Load with 450 W Budget and Self-Healing

The 450 watt PoE budget powers attached devices continuously without the thermal throttling seen in short-burst tests. Store-and-forward switching with 2 MB buffer memory and 12 KB jumbo frames handles steady traffic streams. The Powered Device Monitor automatically restarts any PoE device that stops responding, maintaining uptime without manual intervention. IPv4 features including SNMP, DHCP and LLDP operate consistently under load.

Rackmount Install with SFP+ Flexibility

The rackmount chassis fits standard cabinets and uses auto-sensing 10/100/1000 RJ45 ports that negotiate speed without configuration. Six open SFP+ slots accept 10G or 1G transceivers, letting you defer 10G deployment until needed. Management runs through HTTP, HTTPS, SSH, Telnet and SNMP with ACL security. Domotz compatibility adds cloud oversight. The switch is not stackable, so each unit manages independently.

Highlights

  • Powers up to 48 PoE devices with a 450 W budget
  • Six 10 Gbps SFP+ uplinks for high-speed backbone links
  • PDM self-healing restarts unresponsive PoE endpoints automatically
  • Cloud-ready management via Domotz platform
  • 12 KB jumbo frames and 2 MB buffer handle bursty traffic

Specifications

BrandIntellinet Network Solutions
ModelManaged Gigabit Ethernet PoE Switch
FormatRackmount
Network Management TypeManaged
Uplink Ports6
Uplink InterfaceSFP
Uplink SpeedSFP+
Primary Ports48 x RJ45
Primary Port Speed10/100/1000Mbps
Switching MethodStore and Forward
VLAN SupportYes
Jumbo Frames12KB
Buffer Memory2MB
IPv4 FeaturesVLAN, QoS, LACP, IGMP, SNMP, DHCP, LLDP, ICMP
ProtocolsIEEE 802.1d (Spanning Tree Protocol), IEEE 802.1p (Traffic Prioritization), IEEE 802.1q (VLAN Tagging), IEEE 802.1w (Rapid Spanning Tree Protocol), IEEE 802.3ad (Link Aggregation),
IEEE 802.3 (10Base-T Ethernet), IEEE 802.3ab (Twisted Pair Gigabit Ethernet), IEEE 802.3ad (Link Aggregation Control Protocol LACP), IEEE 802.3ae (10 Gigabit Ethernet over fiber),
IEEE 802.3az (Energy Efficient Ethernet EEE), IEEE 802.3af (Power over Ethernet 802.3at Type 1), IEEE 802.3at (Power over Ethernet 802.3at Type 2)
SecuritySNMP, HTTP, HTTPS, SSH, TELNET, ACL
PoEYes
StackableNo
SNMPYes
QoSYes
LACPYes
LayerLayer 3 Light
Layer 2 FeaturesVLAN, QoS, LLDP, ICMP, DHCP, RMON, SNMP, IGMP
Port MirroringYes
Module SupportYes
TopologyStar
Fanyes
PoE Ports48
PoE Power Budget450W
Max Power Consumption460W
Dimensions13.03 x 17.32 x 1.73 in.
Weight14.73 lbs
Temperature0°C to 40°C (32°F to 104°F)
Humidity10% - 90%, Non-condensing
Package Contents48-Port Gigabit Ethernet PoE+ Layer 2+ Managed Switch with Six 10G SFP+ Uplinks, Power cable, Instructions, 19" rackmount brackets

Questions about this item

How much heat and fan noise should I expect when all 48 PoE+ ports draw close to 30 watts each?

The 450 watt PoE budget means the switch cannot power every port at 30 watts simultaneously; typical loads spread across 48 ports keep internal temperatures moderate and fan speed low.

Which SFP+ transceiver modules do I need to buy separately to use the six 10G uplinks?

The six uplink slots accept standard SFP+ modules for 10 Gbps links or 1 Gbps SFP modules if you are not ready for 10G yet.

Will my older 10/100 Mbps IP cameras and access points work on the 48 RJ45 ports without manual configuration?

Each RJ45 port auto-senses 10, 100 or 1000 Mbps and negotiates PoE under IEEE 802.3af or 802.3at, so legacy devices connect immediately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.