Intellinet Network Solutions
Intellinet Cat6a S/FTP Ethernet Cable 3 ft Yellow 10G 500 MHz 26 AWG
A 3 ft Cat6a S/FTP patch cable rated for 10 Gbps at 500 MHz with 26 AWG pure copper conductors, overall braid and per-pair foil shielding, gold-plated RJ45 contacts and snag-free boots
- TypeNetwork Ethernet Cables
- Cat6A
- Connector ARJ45
- Connector BRJ45
- Length3 ft.
- ColorYellow
- Certified Cat6a Class EA for 10 Gbps at 500 MHz per ISO 11801 and EN 50173-1
- S/FTP double shielding with pair foil and overall braid blocks crosstalk and noise
- 100 % bare copper conductors and 50 µin gold contacts ensure low resistance and corrosion resistance
- Snag-free boots and heavy-duty strain relief protect connectors during frequent moves
- Supports PoE++ up to IEEE 802.3bt for power-hungry devices over the same cable
3 ft Cat6a S/FTP patch cable
This three-foot Cat6a S/FTP patch cable delivers 10 Gbps at 500 MHz for short runs between switches, servers or wall outlets. The yellow jacket makes it easy to identify in dense racks or under desks. It is built for installers and IT teams who need certified Class EA performance in a compact length.
Shielded construction with gold contacts
Each pair is wrapped in aluminum foil and the bundle is covered by an overall aluminum braid to suppress crosstalk and external noise. The 50 micro-inch gold-plated RJ45 contacts resist corrosion and maintain low resistance over repeated insertions. Snag-free boots and heavy-duty strain relief protect the connectors during moves and routine maintenance.
PoE++ ready for powered devices
The pure bare copper conductors support all PoE standards up to IEEE 802.3bt Type 4, so it can power wireless APs, cameras or LED lighting without a separate supply. It is wired to both T568A and T568B colour codes for universal compatibility. Buyers who need longer reach or bulk cable for permanent installation should choose a different format.
Highlights
- Certified Cat6a Class EA for 10 Gbps at 500 MHz per ISO 11801 and EN 50173-1
- S/FTP double shielding with pair foil and overall braid blocks crosstalk and noise
- 100 % bare copper conductors and 50 µin gold contacts ensure low resistance and corrosion resistance
- Snag-free boots and heavy-duty strain relief protect connectors during frequent moves
- Supports PoE++ up to IEEE 802.3bt for power-hungry devices over the same cable
Specifications
| Brand | Intellinet Network Solutions |
|---|---|
| Type | Network Ethernet Cables |
| Cat | 6A |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 3 ft. |
| Color | Yellow |
| Shielded | Yes |
Questions about this item
How do I install this 3 ft Cat6a S/FTP patch cable, and what step do people often miss?
Push each RJ45 plug firmly into the port until the snag-free boot clicks, ensuring the 50 micro-inch gold-plated contacts seat fully; the step often missed is verifying the latch engages on both ends.
What maintenance or replacement will this cable need later?
No routine maintenance is required; the pure bare copper conductors and gold-plated contacts resist corrosion, so replacement is only needed if the snag-free boots tear or the RJ45 latch breaks from repeated unplugging.
What limit shows up first under sustained 10 Gbps PoE++ loads?
The 26 AWG stranded conductors reach their thermal and voltage-drop limit first during continuous IEEE 802.3bt power delivery, before the 500 MHz bandwidth or S/FTP shielding becomes a factor.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115078BTC
In stock
