We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Intel X710-T2L dual-port OCP 3.0 network adapter with two RJ45 ports

Intel

Intel X710T2LOCPV3 dual-port 10GBASE-T OCP 3.0 network card

SKU CH-FF2W-VDXZ2 MPN X710T2LOCPV3

Dual-port 10GBASE-T OCP 3.0 adapter with multi-speed RJ45 support and energy-efficient Ethernet

  • FeaturesGeneral RJ45 connections over CAT5e, CAT6, CAT6A cabling Ene
  • Dual 10 GbE ports deliver high-throughput connectivity
  • OCP 3.0 small form factor fits dense server chassis
  • Energy Efficient Ethernet reduces power draw at low utilisation
  • Multi-speed support covers 100 MbE to 10 GbE over copper
  • Hardware offloads for VXLAN, GENEVE and NVGRE accelerate virtualised workloads

Dual-port 10GBASE-T OCP 3.0 adapter

The Intel X710T2LOCPV3 is a dual-port network interface card built for OCP 3.0 small form factor slots. It serves servers and appliances that need two 10GBASE-T links over standard RJ45 cabling. Energy Efficient Ethernet reduces power draw during low utilisation periods. The adapter targets deployments where OCP 3.0 density and copper connectivity are required.

PCIe 3.0 x8 host interface

The card connects through a PCI Express 3.0 x8 electrical interface, which determines whether the host platform can deliver full 10 Gb/s throughput on both ports simultaneously. Backward compatibility covers 100BASE-TX and multi-gigabit speeds of 2.5 GbE and 5 GbE on the same RJ45 media. Buyers whose chassis only provide x4 or x1 slots will not achieve line rate on both ports.

OCP 3.0 SFF slot and CAT5e or better cabling

Installation requires an OCP 3.0 small form factor mezzanine slot and category 5e or higher twisted-pair cable for each port. The design frees standard PCIe add-in slots for other expansion cards while delivering dual 10 GbE connectivity. Systems lacking an OCP 3.0 connector cannot accept this adapter.

Highlights

  • Dual 10 GbE ports deliver high-throughput connectivity
  • OCP 3.0 small form factor fits dense server chassis
  • Energy Efficient Ethernet reduces power draw at low utilisation
  • Multi-speed support covers 100 MbE to 10 GbE over copper
  • Hardware offloads for VXLAN, GENEVE and NVGRE accelerate virtualised workloads

Specifications

BrandIntel
ModelX710-T2L
Part NumberX710T2LOCPV3
FeaturesGeneral
RJ45 connections over CAT5e, CAT6, CAT6A cabling
Energy Efficient Ethernet (EEE)
Load balancing on multiple CPUs
Protect, Detect and Recover
Support for most network operating systems
Time Sync (IEEE 1588*, 802.1as)
OCP NIC 3.0 adapter
Adapter features
Data Rate Supported Per Port : 10/5/2.5/1Gbps and 100Mbps
Bus Type/Bus Width: PCIe 3.0 x8
Interrupt Levels: INTA, MSI, MSI-X
Hardware Certifications: FCC A, cULus, CE, VCCI, BSMI, RCM, KCC, EEE
Controller: Intel® Ethernet Controller X710-AT2 (Dual Port)
Shipping weight0.91 kg
Package size170 × 124 × 28 mm

Questions about this item

What does the dual-port 10GBASE-T rating mean for actual throughput on this card?

Each RJ45 port can run at 10, 5, 2.5, 1 GbE or 100 Mbps, so the card delivers up to 10 Gbps per port over CAT5e, CAT6 or CAT6A cabling.

How does the PCIe 3.0 x8 interface limit the maximum bandwidth of the X710T2LOCPV3?

The PCIe 3.0 x8 link provides enough lane bandwidth for both 10 GbE ports to operate at line rate simultaneously.

What physical slot and bracket does this OCP 3.0 adapter require to install in a server?

It fits an OCP NIC 3.0 Small Form Factor slot and uses the standard OCP 3.0 bracket for tool-less mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.