We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal rackmount switch with eight front ports

Inscape Data Corporation

Inscape Data LinkPower 2008AT 8 Port Gigabit PoE network switch

SKU CH-3B5S-KX0M0

Eight-port Gigabit PoE switch delivers 25.5 W per port and 210 W total with 9600-byte jumbo frames and QoS

  • FormatRackmount
  • Network Management TypeUnmanaged
  • Primary Port Speed10/100/1000Mbps
  • VLAN SupportNo
  • Jumbo Frames9600 bytes
  • StackableYes
  • Gigabit speed for fast data transfers
  • PoE delivers up to 25.5W per port
  • 210W total budget powers multiple devices
  • 9600 byte jumbo frames boost throughput
  • Unmanaged plug-and-play with QoS prioritisation

What this switch is and who it serves

The Inscape Data LinkPower 2008AT is an 8‑port Gigabit PoE switch built for small‑office or branch deployments. It delivers both data and power over standard Ethernet cables to devices such as IP cameras, wireless access points and VoIP phones. The unit mounts in a standard 1U rack space and includes a built‑in power supply for simple installation. No management software is required, so it works immediately after connection.

The specification that decides fit

The critical figure is the 210 W total PoE budget with up to 25.5 W available on each of the eight ports. If the combined draw of your powered devices exceeds 210 W, or any single device needs more than 25.5 W, this switch cannot supply enough power and a higher‑budget model is required. Port speeds are 10/100/1000 Mbps and jumbo frames up to 9600 bytes are supported.

Who should buy and who should look elsewhere

This switch suits installers who need a compact, rack‑mountable PoE solution for a handful of Gigabit endpoints and who do not require VLANs or Layer 3 routing. It is not for networks that need port‑based VLAN segmentation, stacking beyond the basic capability, or a PoE budget larger than 210 W. Buyers needing managed features or higher per‑port power should consider other options.

Highlights

  • Gigabit speed for fast data transfers
  • PoE delivers up to 25.5W per port
  • 210W total budget powers multiple devices
  • 9600 byte jumbo frames boost throughput
  • Unmanaged plug-and-play with QoS prioritisation

Specifications

FormatRackmount
Network Management TypeUnmanaged
Primary Port Speed10/100/1000Mbps
VLAN SupportNo
Jumbo Frames9600 bytes
StackableYes
QoSYes
Layer2
Module SupportYes
CaseMetal Case
Class8 Port Gigabit PoE
VersionNew

Questions about this item

What does the 210 W PoE budget actually let me power at once?

The switch can deliver up to 210 W total, so you could run eight 25.5 W devices simultaneously or a mix of cameras and access points as long as their combined draw stays within that budget.

How does the IEEE 802.3af/at standard limit what I can plug in?

Each port follows the 802.3af/at specification, capping output at 25.5 W per port and negotiating power class with the connected device before supplying voltage.

What rack hardware do I need to mount this 1 U metal chassis?

The unit is a standard 1 U rack-mount case; you only need a pair of front-mount cage nuts or screws matching your rack’s thread pattern to secure it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.