We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal 1U rackmount switch with eight front ports

Inscape Data Corporation

Inscape Data Corporation LinkPower 2008AF 8 Port Gigabit PoE network switch

SKU CH-AS3T-6T1M2

An 8-port gigabit PoE switch delivering 15.4 W per port with a 120 W budget, unmanaged operation and rackmount metal housing

  • FormatRackmount
  • Network Management TypeUnmanaged
  • Primary Port Speed10/100/1000Mbps
  • VLAN SupportNo
  • Jumbo Frames9600 bytes
  • PoEYes
  • Gigabit throughput for fast file transfers with 10/100/1000Mbps ports
  • Powers IP cameras and APs directly via 15.4W per port PoE
  • 120W total budget supports eight devices simultaneously
  • Unmanaged plug-and-play setup needs no configuration
  • Metal 1U rackmount chassis fits standard cabinets

Eight-port Gigabit PoE switch

The Inscape Data LinkPower 2008AF delivers eight 10/100/1000 Mbps ports with IEEE 802.3af Power over Ethernet. Each port supplies up to 15.4 W and the total PoE budget is 120 W. The unmanaged Layer 2 design means plug-and-play deployment with no configuration required. A metal chassis and built-in power supply fit a standard 1U rackmount footprint.

Best for simple PoE deployments

This switch suits installers who need to power IP cameras, wireless access points or VoIP phones without separate injectors. It also works for small offices that want silent, fanless operation in a rack. Buyers who need VLAN segmentation, port mirroring or SNMP management should look at a managed alternative. Networks that require more than 15.4 W per device or a larger aggregate PoE budget will exceed the available power headroom.

120 W total PoE budget

The 120 W pool comfortably runs eight Class 3 devices at full 15.4 W simultaneously. Jumbo frames up to 9600 bytes help with large video or image transfers. Quality of Service prioritisation keeps latency-sensitive traffic flowing. The switch runs out of headroom when more than eight powered devices are attached or when any single device demands more than the 15.4 W per-port limit.

Highlights

  • Gigabit throughput for fast file transfers with 10/100/1000Mbps ports
  • Powers IP cameras and APs directly via 15.4W per port PoE
  • 120W total budget supports eight devices simultaneously
  • Unmanaged plug-and-play setup needs no configuration
  • Metal 1U rackmount chassis fits standard cabinets

Specifications

FormatRackmount
Network Management TypeUnmanaged
Primary Port Speed10/100/1000Mbps
VLAN SupportNo
Jumbo Frames9600 bytes
PoEYes
StackableYes
Layer2
Port MirroringNo
Module SupportYes
CaseMetal Case
Class8 Port Gigabit PoE
VersionNew

Questions about this item

Do I need an existing 10/100/1000Mbps network backbone for the 8-port Gigabit PoE switch to deliver full speed?

Yes, the switch negotiates 10, 100 or 1000Mbps on each port so the upstream link must support Gigabit to avoid a bottleneck.

Will my legacy 10/100Mbps IP cameras still receive 15.4W PoE power on this IEEE802.3af switch?

The switch supplies 15.4W per port to any IEEE802.3af device regardless of whether the data link runs at 10, 100 or 1000Mbps.

How can I verify the 120W total PoE budget is active after rack-mounting the unit?

Connect powered devices; the switch allocates up to 15.4W per port until the 120W budget is reached, and front-panel LEDs show active PoE on each port.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.