InnoGear PMS75 Overhead Phone Mount Webcam Stand Camera Dock
Heavy metal-base overhead phone and webcam mount with 360° ball head, 13.19–22.24" height range, and 2.5–5.5" padded clamp
- SpecificationsPMS75, InnoGear, 6.604 L x 23.495 W x 44.0944 H centimeters,
- FeaturesOverhead Camera Mount, Flexible Phone Stand, Phone Mount for
- Heavy 3.62 lb metal base keeps the stand stable during recording
- Height adjusts from 13.19" to 22.24" for flexible shooting setups
- 360° horizontal swivel and 180° boom arm enable any camera angle
- 5" to 5.5" padded clamp fits iPhone 16 and other smartphones securely
- Standard 1/4-inch thread supports webcams, lights and pico projectors
InnoGear PMS75 Overhead Phone Mount
The InnoGear PMS75 is a tabletop camera dock designed for creators who need a stable overhead view. Its 3.62 lb metal base lowers the centre of gravity and the non-slip pads absorb vibration. A standard 1/4-inch thread accepts smartphones, webcams, lights or pico projectors. The padded clamp grips devices from 2.5 to 5.5 inches wide without scratching them.
Build integration and clearance
The stand height adjusts from 13.19 to 22.24 inches and the boom arm swings through 180 degrees for overhead or side angles. A 360-degree rotatable ball head lets you spin the device to any orientation without moving the base. Operating the arm at halfway extension increases load capacity while keeping the centre of gravity above the base front centre for tip-free stability on a desk or table.
Included accessories and their impact
The universal 1/4-inch thread and padded clamp ship ready to use, removing the need for separate adapters for phones, Logitech webcams, LED panels or pico projectors. The 12-month manufacturer coverage backs the metal construction and adjustable joints. No additional software or mounting plates are required to start recording, streaming or teaching immediately.
Highlights
- Heavy 3.62 lb metal base keeps the stand stable during recording
- Height adjusts from 13.19" to 22.24" for flexible shooting setups
- 360° horizontal swivel and 180° boom arm enable any camera angle
- 5" to 5.5" padded clamp fits iPhone 16 and other smartphones securely
- Standard 1/4-inch thread supports webcams, lights and pico projectors
Specifications
| Brand | InnoGear |
|---|---|
| Series | PMS75 |
| Model | PMS75 |
| Specifications | PMS75, InnoGear, 6.604 L x 23.495 W x 44.0944 H centimeters, Tabletop Mount, Overhead Camera Mount, Flexible Phone Stand, Phone Mount for Recording, 12 months |
| Features | Overhead Camera Mount, Flexible Phone Stand, Phone Mount for Recording |
Questions about this item
How much weight can the 1/4-inch universal thread support when the boom arm is fully extended?
The 3.62 lb metal base and 5.07 lb total weight lower the centre of gravity; positioning the boom arm directly above the base's front centre aligns the centre of gravity for maximum load capacity at halfway extension.
Does the ball head generate any audible creak or vibration after hours of continuous streaming?
The non-slip base absorbs vibration and the smooth 360° swivel ball head locks securely, keeping the mount rock-solid during extended live streams or video calls without audible noise.
Which devices can I attach immediately using the included 1/4-inch thread and 2.5-5.5" padded clamp?
The standard 1/4-inch thread fits Logitech webcams, LED lights and pico projectors, while the padded clamp grips iPhone 16, 15, 14, 13, 12 series, Samsung Galaxy, Google Pixel and other smartphones within the 2.5-5.5" range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Rokinon 16mm f/2.0 ED AS UMC CS lens for Fujifilm X with UV and cleaning kits
- Zoom Lens



