We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black low-profile microphone boom arm with three-axis joints and desk clamp, matte finish, 26.1 inch reach

InnoGear MS153 Low-Profile Mic Arm 26.1in 1.5kg Black

SKU CH-WG2M-86FK3

A low-profile boom arm with 26.1 in reach, 360° rotation and 3-axis joints holds microphones up to 1.5 kg while sitting just 3.27 in above the desk

  • FinishBlack
  • Length26.1 inches
  • Specification3-Axis Arm, Clamp, 26.1 inches, Matte
  • Feature3-Axis Arm
  • Dimension10.5918 cm x 11.811 cm x 40.4114 cm
  • Weight1.22 kilograms
  • Low-profile design clears monitor space with just 3.27in height
  • 1in horizontal reach plus 360° rotation positions mic anywhere
  • 270° and 250° vertical joints enable precise angle control
  • Alloy-steel build supports microphones up to 1.5kg securely
  • Quick assembly via clamp mount gets you recording fast

Low-Profile Mic Arm 26.1in

The InnoGear MS153 is a low-profile microphone arm designed for desk mounting. Its compact profile extends only 3.27 inches from the desk to the top of the lower arm, tucking neatly beneath a monitor. It suits streamers, podcasters, and remote workers who need a professional setup without visual clutter.

1.5kg Capacity and Reach

The arm supports microphones up to 1.5 kg (3.3 lbs) and provides a horizontal reach of 26.1 inches. It handles most broadcast microphones and lighter camera or phone rigs comfortably. Heavier large-diaphragm condensers with bulky shock mounts may exceed the load limit or strain the joints at full extension.

3-Axis Adjustment Limits

The stand offers 360° horizontal rotation at the base, 270° vertical adjustment at the arm joints, and 250° at the microphone attachment joint. This three-axis range covers most desktop positioning needs. It cannot articulate a full 360° vertically at the mic joint, limiting some upside-down or extreme overhead angles.

Highlights

  • Low-profile design clears monitor space with just 3.27in height
  • 1in horizontal reach plus 360° rotation positions mic anywhere
  • 270° and 250° vertical joints enable precise angle control
  • Alloy-steel build supports microphones up to 1.5kg securely
  • Quick assembly via clamp mount gets you recording fast

Specifications

BrandInnoGear
ModelMS153
Part NumberMS153
FinishBlack
Length26.1 inches
Specification3-Axis Arm, Clamp, 26.1 inches, Matte
Feature3-Axis Arm
Dimension10.5918 cm x 11.811 cm x 40.4114 cm
Weight1.22 kilograms

Questions about this item

Will the 26.1-inch horizontal reach and 360° rotation let me position the mic beside my existing monitor arm without interference?

The arm extends 26.1 inches horizontally and rotates a full 360°, so you can swing it clear of a monitor arm and place the microphone exactly where you need it.

How do I verify the 3-axis joints are holding the 1.5 kg weight limit without drifting after I tighten them?

Set the mic at the desired angle, tighten each joint, then watch for any sag over several minutes; the alloy-steel construction and 270° vertical at the arm plus 250° at the mic joint are designed to lock solidly.

Does the package include the 3/8″ to 5/8″ adapter and the 1/4″ thread adapter, or do I buy them separately?

The box supplies the clamp base, the 3-axis boom arm, and both the 3/8″ to 5/8″ and 3/8″ to 1/4″ screw adapters — no extra adapters are required for standard microphones.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.