Innocard
Innocard MCIO 74P PCIe 5.0 to U.2 x2 Y Cable 50cm with U.2 to M.2 Adapter x2
Connects a PCIe 5.0 MCIO 74P port to two U.2 drives with included M.2 adapters and built-in power protection
- Changer TypePCIe Gen5
- Connects PCIe 5.0 host to two U.2 drives via 74-pin MCIO cable
- 50 cm Y-cable keeps dual-drive routing tidy inside the chassis
- Each adapter converts U.2 to M.2 with on-board 12 V-to-3.3 V buck converter
- Built-in 5 A fuse and 400 W TVS protect SSD power rails
- Red LED blinks to show M.2 drive activity status
PCIe 5.0 MCIO 74P Y-Cable Kit
This kit connects a 74-pin MCIO 5.0 port to two U.2 SFF-8639 drives using a 50 cm Y-cable and includes two U.2-to-M.2 adapters. It targets builders adding high-speed NVMe storage to platforms with native Gen5 MCIO headers. The adapters convert U.2 bays for M.2 NVMe modules with integrated power regulation.
Verify MCIO Pin-Count And Drive Form Factor
Confirm the host board exposes a 74-pin MCIO connector rather than the 38-pin variant before ordering. Ensure the target drives are U.2 SFF-8639 or M.2 NVMe modules compatible with the adapter's 12 V input and 3.3 V conversion circuitry. The cable length is fixed at 50 cm, so measure the internal routing path to the drive bays.
Sustained Load Protection And Power Delivery
Each adapter embeds a 5 A fuse, 400 W bidirectional TVS diodes and a synchronous buck converter that delivers up to 5.5 A continuous current at 3.3 V. Over-current, under-voltage and thermal shutdown circuits protect the SSD during prolonged heavy I/O. A 6.5 A hot-swap controller with 32 mΩ MOSFET manages inrush and reverse-current events without throttling.
Highlights
- Connects PCIe 5.0 host to two U.2 drives via 74-pin MCIO cable
- 50 cm Y-cable keeps dual-drive routing tidy inside the chassis
- Each adapter converts U.2 to M.2 with on-board 12 V-to-3.3 V buck converter
- Built-in 5 A fuse and 400 W TVS protect SSD power rails
- Red LED blinks to show M.2 drive activity status
Specifications
| Changer Type | PCIe Gen5 |
|---|
Questions about this item
What comes in the kit and what must be purchased separately?
The kit includes a 50 cm MCIO 74-pin PCIe 5.0 to dual U.2 Y-cable and two U.2-to-M.2 adapter boards. M.2 NVMe drives are not included and must be bought separately.
Which cable variant should I choose for a dual-drive setup?
The supplied Y-cable splits one MCIO 74-pin host port into two U.2 connectors, so a single kit supports two drives.
What does the PCIe 5.0 rating mean once the cable is installed?
The cable and adapters are designed for PCIe 5.0 signalling, preserving Gen5 bandwidth and latency to each connected M.2 NVMe SSD.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114866BTC
In stock
