INMISS
INMISS SDI to HDMI Converter Space Gray audio video converter
Converts HD-SDI and 3G-SDI signals to HDMI up to 1080p with an SDI loop output, USB 5V power, and compact 83x55x24 mm metal housing
- Changer TypeAll-in-One (VGA/DVI/HDMI)
- StyleStandard
- ColorSpace Gray
- Converts SDI to HDMI for 1080P display
- SDI loop-through keeps source signal available
- Handles HD-SDI and 3G-SDI at 2.97 Gb/s
- USB 5 V power simplifies installation
- Compact 83 x 55 x 24 mm fits tight spaces
INMISS SDI to HDMI Converter
The INMISS SDI to HDMI Converter is a compact adapter that translates HD-SDI and 3G-SDI signals into HDMI for display on standard monitors and televisions. It accepts SDI data rates of 1.485Gb/s and 2.97Gb/s and provides an SDI loop output so the original feed can continue to another destination. Power is drawn from a USB DC 5V/1A source. The unit measures 83x55x24mm and weighs 163G.
Suited for broadcast and AV setups
This converter suits operators who need to view SDI camera or switcher output on an HDMI-equipped screen without a dedicated SDI monitor. It is not for workflows that require 4K resolution, HDR metadata pass-through or embedded audio extraction beyond what the HDMI output carries. Installations needing rack-mount genlock or redundant power should look at purpose-built distribution gear.
Key spec: 1080P maximum output
The single specification that decides fit is the 1080P output ceiling. If the source delivers 1080i or 1080p over HD-SDI or 3G-SDI, the converter will display it on an HDMI monitor. Sources running higher resolutions or frame rates outside the supported 1.485Gb/s and 2.97Gb/s rates will not produce a valid image.
Highlights
- Converts SDI to HDMI for 1080P display
- SDI loop-through keeps source signal available
- Handles HD-SDI and 3G-SDI at 2.97 Gb/s
- USB 5 V power simplifies installation
- Compact 83 x 55 x 24 mm fits tight spaces
Specifications
| Changer Type | All-in-One (VGA/DVI/HDMI) |
|---|---|
| Style | Standard |
| Color | Space Gray |
Questions about this item
Will the converter pass through the SDI signal to another device while simultaneously sending video to my HDMI monitor?
The unit includes an SDI loop output that repeats the incoming SD-SDI, HD-SDI or 3G-SDI stream so a second display or recorder can stay connected.
How can I confirm the converter is active and receiving a valid SDI signal after I connect everything?
Power the converter via the USB DC 5 V/1 A port, attach the SDI source and HDMI display, and the unit begins processing automatically when all cables are seated.
Which cables and power supply are included, and what must I provide myself?
The converter itself is supplied; you will need to source an SDI cable, an HDMI cable and a USB 5 V/1 A power adapter separately.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



