We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight corded production screwdriver with 10 ft cord and quick-change chuck

Ingersoll/Rand

Ingersoll/Rand ES60P hand screwdriver

SKU CH-HNWZ-A8798 MPN ES60P

A production screwdriver with adjustable torque from 4.4 to 17 in-lb and a 1/4 in quick-change chuck

  • Adjustable torque from 4.4 to 17 in-lb for precise fastening
  • Shut-off clutch stops at set torque to prevent over-tightening
  • 1,000 RPM free speed drives screws quickly
  • 1/4 in quick-change hex chuck swaps bits fast
  • 10 ft cord with two-prong plug reaches the work area

Adjustable Torque Range

The Ingersoll/Rand ES60P is a corded production screwdriver designed for repetitive fastening tasks. Its shut-off clutch stops the motor at a preset torque between 4.4 and 17 in-lb. Variable speed control and continuous speed settings allow the operator to match the drive speed to the application. A 1/4-inch quick-change chuck accepts standard hex bits for rapid changeover.

Shut-Off Clutch Operation

This tool suits assembly lines and workstations where consistent torque repeatability is required and a direct power connection is practical. It is not suited for portable or cordless operation, nor for applications exceeding 17 in-lb of torque. The fixed 10-foot cord and two-prong plug limit mobility compared with battery-powered alternatives. Buyers needing higher torque or wireless freedom should look elsewhere.

Torque Range 4.4 to 17 in-lb

The adjustable torque window of 4.4 to 17 in-lb is the single specification that determines whether this driver fits the fastening specification. If the joint requires torque outside this range, the ES60P cannot be used. The shut-off clutch delivers repeatable results within these limits at up to 1,000 RPM free speed.

Highlights

  • Adjustable torque from 4.4 to 17 in-lb for precise fastening
  • Shut-off clutch stops at set torque to prevent over-tightening
  • 1,000 RPM free speed drives screws quickly
  • 1/4 in quick-change hex chuck swaps bits fast
  • 10 ft cord with two-prong plug reaches the work area

Specifications

BrandIngersoll-Rand
ModelES60P

Questions about this item

Which torque setting should I pick for light assembly versus heavier fastening?

Adjust the clutch between 4.4 in-lb and 17 in-lb; lower settings suit light assembly while the upper end handles heavier fastening.

What does the 1,000 RPM free speed mean when I am actually driving screws?

The motor spins up to 1,000 RPM under no load; under load the speed drops, giving controlled drive without stripping fasteners.

How does the 1/4 in quick-change chuck affect bit swaps and compatibility?

The 1/4 in hex quick-change chuck accepts standard 1/4 in bits and allows one-handed bit changes without tools.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.