Ingersoll/Rand
Ingersoll/Rand 5RALP1 air hand screwdriver 19 to 35 in.-lb
Air-powered pistol-grip screwdriver delivers 19 to 35 in.-lb torque at 2,000 RPM with reversible operation
- TypeHex Drive Bits
- Delivers 19 to 35 in-lb torque range for precise fastening
- Positive clutch ensures consistent torque control on every job
- 2,000 RPM free speed drives fasteners quickly and efficiently
- 1/4 in hex drive accepts standard bits for versatile use
- Reversible operation allows easy driving and removal of fasteners
Product Identity
The Ingersoll/Rand 5RALP1 is an air-powered pistol-grip screwdriver built for assembly tasks that require repeatable torque between 19 and 35 in-lb. It suits technicians who need a lightweight, reversible tool for production lines or maintenance benches where compressed air is already available.
Build Integration
The driver connects through a standard 1/4 in NPT air inlet and runs on 90 psi supply pressure with a minimum 1/4 in hose. At 7 1/4 in overall length it fits tight workspaces, while the 1/4 in hex chuck accepts common insert bits without additional adapters.
Sustained Operation
The positive clutch delivers a maximum torque of 35 in-lb and maintains 4.00 CFM average consumption during a 15 second run cycle, rising to 17.0 CFM under continuous full-load use. Free speed reaches 2,000 RPM, and the industrial-duty rating supports extended shifts without cool-down pauses.
Highlights
- Delivers 19 to 35 in-lb torque range for precise fastening
- Positive clutch ensures consistent torque control on every job
- 2,000 RPM free speed drives fasteners quickly and efficiently
- 1/4 in hex drive accepts standard bits for versatile use
- Reversible operation allows easy driving and removal of fasteners
Specifications
| Brand | Ingersoll-Rand |
|---|---|
| Model | 5RALP1 |
| Type | Hex Drive Bits |
Questions about this item
How long can the 5RALP1 run at full load before the 17.0 CFM demand overheats the motor?
The tool is rated for industrial duty cycle, but sustained full-load use will hit the 17.0 CFM air limit first; size your compressor and hose to maintain 90 psi continuously.
What noise and heat should I expect when the driver runs all day at 2,000 RPM?
At 90 psi the 5RALP1 delivers 4.00 CFM average over 15 seconds; expect typical pneumatic motor whine and warm exhaust air — no abnormal heat if supply pressure stays steady.
Which compressor fittings and hose must I already have to operate this 1/4 in NPT air screwdriver?
You need a 1/4 in NPT air inlet connection, a minimum 1/4 in ID hose, and a compressor capable of 90 psi at 17.0 CFM full load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
