Ingersoll/Rand
Ingersoll/Rand 49096-1 5 in 5 Hole PSA Backup Pad Power
A 5-inch foam backup pad with five vacuum holes and a 5/16-24 threaded shaft for adhesive sanding discs at 12,000 RPM
- TypeSanders
- Soft foam density reduces surface marring
- 5 vacuum holes improve dust extraction during sanding
- 12,000 RPM maximum speed supports aggressive material removal
- 5/16 in.-24 threaded shaft fits compatible Ingersoll-Rand sanders
- 5 in. diameter matches standard abrasive discs
5-inch PSA Backup Pad
This 5-inch PSA backup pad accepts adhesive-backed abrasive discs for random-orbital sanding. It mounts on a 5/16-24 threaded shaft and carries five vacuum holes for dust extraction. The foam body is rated soft density and has a maximum operating speed of 12,000 RPM. Overall thickness is 3/8 in.
Best for adhesive disc sanding
Technicians who use quick-change hook-and-loop discs need a different pad because this model only accepts PSA-type abrasives. Users requiring a firm or medium-density backup surface should look at another option. The 5-hole pattern matches specific sander housings; other hole counts will not align.
12,000 RPM maximum speed
The 12,000 RPM limit determines whether the pad can run safely on a given sander. Exceeding this speed risks pad failure and disc separation. Verify the tool's free speed before installation. The 5/16-24 thread must also match the spindle.
Highlights
- Soft foam density reduces surface marring
- 5 vacuum holes improve dust extraction during sanding
- 12,000 RPM maximum speed supports aggressive material removal
- 5/16 in.-24 threaded shaft fits compatible Ingersoll-Rand sanders
- 5 in. diameter matches standard abrasive discs
Specifications
| Type | Sanders |
|---|---|
| Brand | Ingersoll-Rand |
| Model | 49096-1 |
Questions about this item
How long can I run this pad at 12,000 RPM before the foam softens?
The soft-density foam is rated for continuous operation at 12,000 RPM; heat build-up depends on the sander and abrasive used.
What noise and vibration levels should I expect during all-day sanding?
Noise and vibration are determined by the host sander; the pad itself adds minimal mass at 5 in diameter and 3/8 in thickness.
Which sander spindle does the 5/16-24 threaded shaft fit?
The pad mounts on any sander with a 5/16 in.-24 threaded spindle; the five vacuum holes align with standard 5-hole dust extraction.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
