Ingersoll/Rand
Ingersoll/Rand 49095-1 Backup Pad 5 in 12000 RPM
A 5-inch adhesive-backed foam backup pad for sanders, rated to 12000 RPM with a 5/16-24 threaded shaft
- TypeSanders
- 5 in backup pad fits 5 in abrasive discs
- 12 000 RPM maximum speed matches high speed sanders
- Soft foam density gives consistent surface contact
- Threaded 5/16 in 24 shaft installs on compatible tools
- Adhesive backed mounting allows quick disc changes
Ingersoll/Rand 5 in Backup Pad
The Ingersoll/Rand 49095-1 is a 5 in adhesive-backed disc backup pad built for high-speed sanding. It mounts on a 5/16 in. -24 threaded shaft and is rated for a maximum operating speed of 12,000 RPM. The foam construction provides a soft density for contour work. This new pad suits professionals preparing surfaces with adhesive-backed abrasives.
Suited for adhesive-backed discs on threaded tools
This pad fits sanders that accept a 5/16 in. -24 threaded shaft and use adhesive-backed discs. It will not work with hook-and-loop abrasives or vacuum-assisted sanders because it has no vacuum holes. Users needing a firm-density pad or a quick-change mounting system should look at a different model. The soft foam is intended for finishing rather than heavy stock removal.
5 in diameter with soft foam for finishing
The 5 in diameter matches standard disc sizes and the 3/8 in. thickness gives adequate backing for contour sanding. At 12,000 RPM the pad handles aggressive finishing passes on wood, metal or composite surfaces. Headroom drops when used for heavy material removal or on machines that exceed the rated speed. The non-vacuum design means dust extraction must be managed separately.
Highlights
- 5 in backup pad fits 5 in abrasive discs
- 12 000 RPM maximum speed matches high speed sanders
- Soft foam density gives consistent surface contact
- Threaded 5/16 in 24 shaft installs on compatible tools
- Adhesive backed mounting allows quick disc changes
Specifications
| Type | Sanders |
|---|---|
| Brand | Ingersoll-Rand |
| Model | 49095-1 |
Questions about this item
What sander do I need to run the 49095-1 backup pad?
The pad fits a sander with a 5/16 in. -24 threaded shaft and a maximum speed of at least 12,000 RPM.
Can I keep using my existing adhesive-backed discs with this pad?
Yes, the foam pad uses a PSA adhesive mount, so your current adhesive-backed discs will attach directly.
How can I confirm the pad is running true after fitting it?
Spin the sander up to 12,000 RPM and check that the 5 in. round pad runs without wobble or vibration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
