Ingersoll/Rand
INGERSOLL-RAND 3103KA Angle Grinder Kit Medium Duty 0.2 hp 90 psi 538 lpm 3.5 lb 4.1 m/s²
Medium-duty pneumatic angle grinder kit with variable speed, 0.2 hp output, 538 lpm air consumption at 90 psi, weighing 3.5 lb and producing 4.1 m/s² vibration
- Medium-duty pneumatic power with 0.2 hp output
- Consistent 90 psi operation for reliable material removal
- Low 4.1 m/s² vibration reduces operator fatigue
- Lightweight 3.5 lb design improves handling control
- High 538 lpm air flow supports sustained grinding performance
0.2 hp Angle Grinder Kit
The INGERSOLL-RAND 3103KA is a pneumatic angle grinder kit rated at 0.2 hp for medium-duty applications. It operates at a required pressure of 90 psi with an air consumption of 538 lpm. The tool weighs 3.5 lb and features a 1/4 in NPT female air inlet.
Variable Speed and Pad Options
Variable speed settings allow the operator to adjust performance to the specific material or finishing task. The kit includes threaded-shank pads in 2 in and 3 in sizes for abrasive mounting. No dust collection port or vacuum attachment is provided, and exhaust exits from the bottom of the housing.
Suited for Light Fabrication and Finishing
This grinder suits technicians and fabricators who need a compact air tool for blending, deburring or surface preparation at moderate power. Buyers who require higher horsepower for heavy stock removal or an integrated dust extraction system for a cleaner workspace should look at other models.
Highlights
- Medium-duty pneumatic power with 0.2 hp output
- Consistent 90 psi operation for reliable material removal
- Low 4.1 m/s² vibration reduces operator fatigue
- Lightweight 3.5 lb design improves handling control
- High 538 lpm air flow supports sustained grinding performance
Specifications
| Brand | INGERSOLL-RAND |
|---|
Questions about this item
How often should the 1/4 in NPT air inlet and spindle bearings be serviced on the 3103KA angle grinder?
Clean the 1/4 in NPT air inlet filter daily and lubricate the spindle bearings with pneumatic tool oil every shift to prevent premature wear.
At 538 lpm air consumption and 90 psi, will the compressor keep up during continuous grinding?
Sustained use is limited by compressor capacity; a unit delivering at least 538 lpm at 90 psi is required to avoid pressure drop and speed loss.
What noise, vibration and heat levels should I expect when running the 0.2 hp motor all day?
Vibration measures 4.1 m/s² at the handle; exhaust exits at the bottom, directing heat and noise away from the operator during extended runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
