Infinity Cable Products
Infinity Cable Products CAT6 CMR 23AWG UTP 1000ft 550MHz Gray Reelex II 2 in 1 accessory
CAT6 CMR riser cable, 23AWG solid copper, 1000ft in Reelex II box, 550MHz bandwidth, supports 1Gb Ethernet up to 328ft
- 550 MHz bandwidth supports Gigabit and 10Gb Ethernet at shorter runs
- 23 AWG solid pure copper conductors deliver 3-5 dB margin over TIA-568.2-D
- Reelex II box enables tangle-free pulling for 1000 ft installations
- CMR riser rating allows in-wall and between-floor routing up to 328 ft
- Fluke DSX-8000 tested for verified crosstalk and insertion-loss performance
Product identity
Infinity Cable CAT6 CMR Riser 23AWG UTP bulk cable ships as 1000 feet of solid pure copper in a Reelex II pull box. It targets installers and IT teams who need Category 6 performance for Gigabit Ethernet, PoE and PoE+ runs up to 328 feet.
Pre-installation checks
Verify the route stays within non-plenum spaces such as walls or between floors where CMR rating applies. Confirm connectors, keystone jacks and field-termination plugs are rated for unshielded 23AWG solid copper. Ensure the 550 MHz bandwidth meets the project specification before pulling.
Build integration
The spline-free design with extra pair insulation eases termination and reduces near-end crosstalk without a centre separator. Reelex II packaging pays out smoothly to speed long pulls and the box is fully recyclable. The cable frees up pathway space by substituting for CM-rated runs while delivering 1 Gb at full distance and 10 Gb at shorter lengths.
Highlights
- 550 MHz bandwidth supports Gigabit and 10Gb Ethernet at shorter runs
- 23 AWG solid pure copper conductors deliver 3-5 dB margin over TIA-568.2-D
- Reelex II box enables tangle-free pulling for 1000 ft installations
- CMR riser rating allows in-wall and between-floor routing up to 328 ft
- Fluke DSX-8000 tested for verified crosstalk and insertion-loss performance
Specifications
No published specifications for this item yet.
Questions about this item
Does the 1000ft box include connectors or keystone jacks, or must they be purchased separately?
The 1000ft Reelex II box contains only the bulk Cat6 CMR cable with four unshielded twisted pairs; RJ45 plugs, keystone jacks and field-termination plugs are not included and must be bought separately.
When should I choose the 550MHz CMR riser version instead of a plenum or shielded alternative?
Choose this 550MHz CMR riser cable for in-wall and between-floor runs in non-plenum spaces where a spline-free design eases pulling and PoE/PoE+ support is required.
What real-world speed can I expect from the 550MHz rating at the full 328ft distance?
At the full 328ft (100m) run the cable is rated for 1Gb Ethernet; 10Gb speeds are only achievable at shorter distances.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
