We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of 6.5 inch white marine coaxial speakers with integral grilles and stainless hardware

Infinity

Infinity 622MW 6.5" 2-Way Marine Coaxial Speakers 75W RMS

SKU CH-RHAR-X2W42

Water- and UV-resistant 6.5" two-way marine coaxial speakers deliver 75W RMS power with 92dB sensitivity

  • TypeMarine Electronics
  • Features6.5" two-way marine speakers with 75W RMS / 225W peak power
  • Speaker SizeOther
  • Amplifier ClassClass D
  • Amplifier Channels4 Channels
  • Weight4.49
  • 75 watts RMS power for strong audio output
  • 92 dB sensitivity at 2.83 volts for efficient sound reproduction
  • Water and UV resistant construction withstands harsh marine conditions
  • Corrosion proof basket with stainless steel hardware ensures lasting durability
  • 50 Hz to 20 kHz frequency response covers full audio range

Marine audio upgrade

The Infinity 622MW 6.5" 2-Way Marine Coaxial Speakers are built for boat owners who need reliable sound in wet, sun-exposed environments. Each speaker handles 75W RMS and 225W peak power with a 92dB sensitivity rating at 2.83V/1m. The frequency response spans 50Hz to 20KHz at a 4-ohm impedance. A corrosion-proof basket and water- and UV-resistant construction protect the drivers from salt spray and sunlight.

Mounting hardware included

Stainless-steel mounting hardware is supplied in the box, so no separate bracket purchase is required. The integral grille shields the cone and tweeter from impact and debris while maintaining a clean appearance. These items are the only accessories bundled; no amplifier, wiring kit or signal processor is included. The Class D amplifier specification refers to a compatible amplifier type, not a built-in module.

Check your helm space

Verify that a 6.5" cut-out fits your console or cabin panel before ordering. Confirm your amplifier or head unit can deliver up to 75W RMS per channel into a 4-ohm load. Ensure the mounting depth behind the panel accommodates the speaker basket and that the 4.49kg total weight for the pair is acceptable for your installation location. Buyers needing a different driver size or higher power handling should look elsewhere.

Highlights

  • 75 watts RMS power for strong audio output
  • 92 dB sensitivity at 2.83 volts for efficient sound reproduction
  • Water and UV resistant construction withstands harsh marine conditions
  • Corrosion proof basket with stainless steel hardware ensures lasting durability
  • 50 Hz to 20 kHz frequency response covers full audio range

Specifications

BrandInfinity
TypeMarine Electronics
Features6.5" two-way marine speakers with 75W RMS / 225W peak power
Speaker SizeOther
Amplifier ClassClass D
Amplifier Channels4 Channels
Weight4.49

Questions about this item

Will the stainless-steel mounting hardware ever need replacement?

The included stainless-steel mounting hardware resists corrosion in marine environments, so it does not require routine replacement under normal use.

What limits output first during long listening sessions — the 75W RMS thermal rating or the 4-ohm impedance?

The 75W RMS rating is the thermal limit; sustained power above this level will cause the voice coils to overheat before impedance becomes a factor.

How much heat do these 92dB sensitivity speakers produce when run all day at moderate volume?

At typical listening levels the 92dB sensitivity keeps amplifier current low, so heat buildup in the voice coils and corrosion-proof basket remains minimal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.