We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White photoluminescent floor tape roll marked Exit Left 130

INCOM Manufacturing Group

INCOM Manufacturing Group GT130EXL1"W White Phosphorescent Floor Marking Tape 130

SKU CH-NFNJ-R8GPB

White phosphorescent floor marking tape glows up to 6 hours for nighttime exit visibility

  • TypeEmergency Exit Signs & Lights Accessories
  • Glows up to 6 hours for nighttime visibility
  • Photoluminescent safety-grade material charges in ambient light
  • White "Exit Left" legend guides evacuation routes
  • Flexible vinyl film with poly-coated liner resists UV
  • Acrylic adhesive bonds to most clean, dry surfaces

High-Visibility Floor Marking

INCOM Manufacturing glow-in-the-dark tape marks items that need strong nighttime visibility. The safety-grade photoluminescent material glows for up to six hours after light exposure. A continuous roll carries the Exit Left legend for clear directional guidance.

Thermals Noise Power

The flexible laminated vinyl film with poly-coated release liner applies without tools or electricity. Acrylic pressure-sensitive adhesive bonds to most clean, dry surfaces. The passive material generates no heat, sound or power draw during use.

UV Resistance And Adhesion

UV-resistant construction prevents degradation from sunlight exposure. The adhesive layer maintains its bond on prepared surfaces without additional fasteners. No software or accessories are included with the tape roll.

Highlights

  • Glows up to 6 hours for nighttime visibility
  • Photoluminescent safety-grade material charges in ambient light
  • White "Exit Left" legend guides evacuation routes
  • Flexible vinyl film with poly-coated liner resists UV
  • Acrylic adhesive bonds to most clean, dry surfaces

Specifications

TypeEmergency Exit Signs & Lights Accessories
BrandINCOM MANUFACTURING

Questions about this item

How do I install the 1"W Exit Left floor marking tape, and what step is often missed?

Clean the surface until it is dry and free of dust, peel the poly-coated release liner, and press the acrylic adhesive firmly; the step most people skip is allowing the adhesive to cure fully before exposing it to foot traffic.

What maintenance or replacement will the photoluminescent tape need over time?

The vinyl tape glows up to 6 hr after light exposure; replace it when the glow duration drops below your safety requirement or if the Exit Left legend becomes illegible from wear.

What limit appears first when the tape is used continuously in a high-traffic area?

The acrylic pressure-sensitive adhesive bond is the first limit; heavy abrasion or moisture can reduce adhesion before the photoluminescent layer degrades.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.