IMIYORE 0.8ft 5.5x2.1mm Female-to-Female DC Pigtail Cable 16AWG 3pcs
A 0.8 ft 5.5x2.1 mm female-to-female DC pigtail cable rated for 12 V, 24 V or 36 V at up to 15 A, supplied as a pack of three with 16 AWG copper conductors
- Length0.8 feet
- Connector DetailFemale-to-Female
- SpecificationsVoltage: 36 volts_of_direct_current; Current: 15 amps; Weigh
- 8 ft length keeps CCTV and LED installs tidy
- 5 × 2.1 mm female-to-female barrel fits standard 12 V / 24 V / 36 V gear
- 16 AWG pure-copper cores carry up to 15 A with low resistance
- PVC jacket resists wear, heat and stays flexible for easy routing
- Pre-tinned pigtail ends let you solder connections fast for custom builds
Product identity
The IMIYORE 0.8ft 5.5x2.1mm Female-to-Female DC Pigtail Cable is a pack of three 16AWG power cords rated for 12, 24 or 36 volts of direct current and up to 15 amps. They suit installers wiring CCTV cameras, LED strips, solar panels or other low-voltage DC equipment that uses a 5.5x2.1mm barrel connector.
Compatibility check
Verify that the power supply and the device both present a 5.5mm outer diameter and 2.1mm inner diameter barrel interface. The cables arrive with pre-tinned leads ready for soldering; confirm that your installation workflow can accommodate a soldered joint rather than a plug-in connection.
Thermals noise and power
The PVC jacket and pure copper core are specified as wear-resistant, high-temperature resistant and highly elastic for normal low-voltage DC use. No active cooling is present, so the cables run silently and their thermal performance depends entirely on staying within the 15 amp current limit.
Highlights
- 8 ft length keeps CCTV and LED installs tidy
- 5 × 2.1 mm female-to-female barrel fits standard 12 V / 24 V / 36 V gear
- 16 AWG pure-copper cores carry up to 15 A with low resistance
- PVC jacket resists wear, heat and stays flexible for easy routing
- Pre-tinned pigtail ends let you solder connections fast for custom builds
Specifications
| Brand | IMIYORE |
|---|---|
| Length | 0.8 feet |
| Connector Detail | Female-to-Female |
| Specifications | Voltage: 36 volts_of_direct_current; Current: 15 amps; Weight: 0.13 lb; Connector: Female-to-Female |
Questions about this item
What comes in the pack and what else do I need to finish the connection?
You get three 0.8 ft female-to-female pigtail cables with pre-tinned ends ready for soldering; you will need a matching 5.5 mm × 2.1 mm male plug on your device or power supply to complete the circuit.
Which voltage and current rating should I match to my 12 V or 24 V equipment?
The cable is rated for 12 V, 24 V and 36 V DC at up to 15 A, so choose it for any 12 V or 24 V load that draws 15 A or less.
What does the 16 AWG / 15 A rating mean when I run it to a CCTV camera or LED strip?
16 AWG pure copper cores keep resistance low, so the 15 A rating holds over the short 0.8 ft length without noticeable voltage drop on 12 V or 24 V cameras and strips.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



