iMBAPrice
iMBAPrice DVFR2W-1 2-Gang Recessed Outlet Box with Paintable Wall Plate
A two-gang recessed outlet box with a paintable trim plate lets 110 V plugs sit flush so furniture can rest closer to the wall
- Recesses 110 V outlets so furniture sits flush against the wall
- Paintable textured trim plate matches any wall finish
- Dual-gang design fits two duplex receptacles or mixed power and low-voltage devices
- Supplied separator isolates power and low-voltage circuits in one box
- Positioning tabs speed 1/2 in drywall alignment during new or retrofit work
Two-gang recessed outlet box
The iMBAPrice DVFR2W-1 is a two-gang recessed electrical mounting box designed for 110-volt outlets. It suits homeowners and installers who want power receptacles or low-voltage devices set back into the wall so furniture can sit flush against the surface.
Non-metallic box with paintable trim
The non-metallic box measures 6.8 by 6 by 4.2 inches and includes a textured trim plate that can be painted to match the surrounding wall. A supplied separator lets you run one power circuit and one low-voltage line in the same enclosure, while positioning tabs help align the box on half-inch wall board.
Replaces standard protruding boxes
This unit replaces a conventional surface-mounted box that leaves plugs sticking out from the wall. The upgrade is worth it when you need a cleaner look behind flat-panel displays, kitchen appliances or tight furniture placements and want the flexibility to combine power and data in a single opening.
Highlights
- Recesses 110 V outlets so furniture sits flush against the wall
- Paintable textured trim plate matches any wall finish
- Dual-gang design fits two duplex receptacles or mixed power and low-voltage devices
- Supplied separator isolates power and low-voltage circuits in one box
- Positioning tabs speed 1/2 in drywall alignment during new or retrofit work
Specifications
| Brand | iMBAPrice |
|---|
Questions about this item
Does the 110 V recessed box accept standard duplex receptacles?
Yes, the two-gang design fits two standard duplex receptacles or two low-voltage devices, and the supplied separator lets you mix one of each.
What wall thickness do the positioning tabs support?
The box includes positioning tabs sized for 1/2 inch drywall or paneling.
How is the box secured during a retrofit install?
Insert the box into the cut opening, tighten the swing brackets against the back of the wall, then attach the paintable trim plate with the included screws.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington K50421WW laptop stand accessory
- Stand
- SmartFit System Sim…
Kensington 52795 24" 16:9 Privacy Screen Accessory
- Screen Protector
- Designed for 16:9 a…
Ergotron 80-107-200 CPU Mount for Thin Client and Flat Panel Display accessory
- Black



