We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gold coloured coaxial splitter with one input and four outputs

iMBAPrice

iMBAPrice 110015 2.4 GHz 4-Way Coaxial Splitter accessory

SKU CH-TZH1-VK75Z

Splits one coaxial signal into four outputs for multiple displays up to 2400 MHz

  • Splits one coaxial signal to four displays
  • 5–2400 MHz range supports video and satellite signals
  • Gold-plated F-type connectors resist corrosion
  • Passive design needs no external power
  • 110015 model provides semi-isolation between outputs

iMBAPrice 110015 Coaxial Splitter

The iMBAPrice 110015 is a passive 4-way coaxial splitter designed to distribute a single incoming signal to four separate outputs. It supports a frequency range up to 2400 MHz and features gold-plated F-type screw connectors for secure attachment. This accessory suits installers or home users needing to feed multiple displays, satellite receivers, or VCRs from one source cable.

Replacing Basic Splitters

This unit replaces simpler two-way or three-way splitters when four output ports are required from a single feed. The jump is worth it when a household or small commercial setup adds a fourth display or recording device and the existing splitter lacks enough ports. Its passive design means no external power supply is needed, simplifying installation compared to amplified alternatives.

Check Your Signal Plan

Before ordering, verify that your incoming signal strength can tolerate the insertion loss of a four-way passive split across all connected devices. Confirm that every destination device uses an F-type coaxial input compatible with the splitter's connectors. Ensure the coaxial cables you plan to use are rated for the 5 to 2400 MHz bandwidth to avoid degrading high-frequency channels.

Highlights

  • Splits one coaxial signal to four displays
  • 5–2400 MHz range supports video and satellite signals
  • Gold-plated F-type connectors resist corrosion
  • Passive design needs no external power
  • 110015 model provides semi-isolation between outputs

Specifications

BrandiMBAPrice

Questions about this item

What connector type does the 110015 splitter use for the coaxial cable?

It uses F-type screw-on connectors for the single input and four output ports.

How do I install the 110015 splitter without degrading the signal?

Hand-tighten each F-connector firmly; avoid over-tightening with tools which can damage the centre pin and raise insertion loss.

Will the gold-plated contacts on the 110015 need cleaning or replacement over time?

Gold plating resists oxidation, so no routine cleaning is required; replace the unit only if physical damage or water ingress occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.