We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 16-pin OBD2 flat ribbon splitter cable 60cm with power switch

iKKEGOL

iKKEGOL OBD2 16 Pin Splitter Cable 60cm with Power Switch

SKU CH-Q3DQ-BCN5Z

Splits one OBD-II port into two female sockets with a 60 cm flat ribbon cable and an integrated power switch to prevent battery drain

  • TypeCar Mount
  • Built-in power switch saves vehicle battery when parked
  • Flat ribbon angled connectors withstand repeated bending in tight spaces
  • Full 16-pin pass-through keeps every OBD-II protocol active
  • Splits one port into two for simultaneous scanner use
  • 60 cm low-profile extension moves heavy dongles away from driver's feet

OBD2 16-pin splitter with power switch

The iKKEGOL cable splits a single OBD-II port into two female sockets while adding an inline power switch. It suits technicians and owners who need simultaneous scanner access or want to cut power to a plugged-in device without unplugging it.

Replaces a basic extension or Y-cable

A plain extender only relocates the port; this adapter adds a second socket and a switch that isolates the scanner from vehicle power when the ignition is off. The upgrade is worth it when you run a permanent logger and a handheld tool together or when parasitic draw threatens the battery.

Handles dual OBD2 devices on compliant vehicles

The 60 cm flat ribbon carries all 16 pins straight through, supporting standard protocols including CAN for live data and fault codes. Headroom ends when a third device is needed or when the host port cannot supply enough current for both connected tools.

Highlights

  • Built-in power switch saves vehicle battery when parked
  • Flat ribbon angled connectors withstand repeated bending in tight spaces
  • Full 16-pin pass-through keeps every OBD-II protocol active
  • Splits one port into two for simultaneous scanner use
  • 60 cm low-profile extension moves heavy dongles away from driver's feet

Specifications

TypeCar Mount

Questions about this item

Will the low-profile J1962 female connector fit under my dashboard without blocking the driver's footwell?

The low-profile J1962 female connector on the car side is designed to sit flush, reducing protrusion so a heavy scanner does not bounce or catch your foot when entering or exiting the vehicle.

Does the power switch cut power to both female ports, and how do I know it is off?

The integrated power switch controls the 16-pin pass-through for both the male and female device ports, and the built-in power light confirms when the circuit is open to prevent battery drain after the ignition is off.

How often should I inspect the 16-pin flat ribbon cable for wear?

Check the ribbon and both J1962 connectors each time you swap scanners; the flat-ribbon construction resists bending fatigue, but frequent plugging can loosen the 16-pin contacts over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.