iKKEGOL
iKKEGOL Mini 1 to 4 Port VGA Splitter Amplifier 250M
Splits one VGA source to four displays with audio support up to 1920 x 1440 resolution over 250 metres
- TypeVGA Splitters
- Ports4
- AudioYes
- Maximum Resolutions1920 x 1440
- Splits one VGA source to four displays
- Supports 1920 x 1440 maximum resolution
- Includes audio pass-through for sound
- Drives VGA signals up to 250M distance
4-port VGA splitter with audio support
This iKKEGOL Mini VGA splitter amplifier takes a single VGA source from a laptop, PC or DVR and distributes it to up to 32 display devices such as monitors, TVs or projectors. It supports a maximum resolution of 1920 x 1440 and includes audio pass-through. The unit is plug-and-play with no software installation required.
Check source output and cable length before ordering
Verify that your source device provides a standard VGA output port and that the displays you intend to connect accept VGA input. The amplifier is rated for signal runs up to 250 metres, so confirm your cable lengths fall within this range. Ensure you have enough VGA and audio cables for every display in the chain.
Highlights
- Splits one VGA source to four displays
- Supports 1920 x 1440 maximum resolution
- Includes audio pass-through for sound
- Drives VGA signals up to 250M distance
Specifications
| Type | VGA Splitters |
|---|---|
| Ports | 4 |
| Audio | Yes |
| Maximum Resolutions | 1920 x 1440 |
Questions about this item
Does the package include the four VGA cables needed to connect the displays?
The splitter unit is supplied; four VGA cables for the outputs must be purchased separately.
Which model should I choose if I need to drive four monitors at 1920 x 1440 resolution?
This single 1-to-4-port model supports up to 1920 x 1440 across all four outputs, so no other version is required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



