IHDAPP
IHDAPP USB C OTG Splitter 60W PD USB-A 2.0 0.13m Gray
A 13 cm USB-C splitter adds a USB-A 2.0 port for 480 Mbps data and passes 60 W PD charging to the host device
- Connector TypeUSB C to USB OTG & PD 60W
- ColorGray
- Cable Length0.13M
- Length0.13M
- Charge at up to 60 W while using a USB device
- Connect keyboards, mice or flash drives via USB 2.0
- Works with iPad Pro 11 and 12.9 from 2018 and 2020
- Compatible with Galaxy S20, S21 and Note 20 series
- Plug-and-play OTG adapter needs no driver installation
USB-C OTG splitter with 60 W PD
This 2-in-1 adapter adds a USB-A 2.0 port and a USB-C power-delivery input to devices that have only a single USB-C socket. It is intended for users who want to connect a keyboard, mouse, flash drive or game controller while keeping their phone, tablet or laptop charged. The cable measures 0.13 m and comes in gray.
Short cable reduces clutter at the desk
The 0.13 m tail keeps the splitter close to the host port, limiting strain on the socket and avoiding tangled wires in tight workspaces. A USB-C female port accepts up to 60 W of power delivery at 20 V / 3 A, while the USB-A female port handles data at 480 Mbps for USB 2.0 peripherals. No drivers are required for operation.
Bus-powered hub limits peripheral choice
The adapter supplies a maximum of 50 mA to the USB-A port, so it cannot run bus-powered hard drives or other high-draw devices. It also does not charge accessories through the USB-A connector — only data transfer is supported. Phones equipped with a 3.5 mm headphone jack may not work with this splitter.
Highlights
- Charge at up to 60 W while using a USB device
- Connect keyboards, mice or flash drives via USB 2.0
- Works with iPad Pro 11 and 12.9 from 2018 and 2020
- Compatible with Galaxy S20, S21 and Note 20 series
- Plug-and-play OTG adapter needs no driver installation
Specifications
| Connector Type | USB C to USB OTG & PD 60W |
|---|---|
| Color | Gray |
| Cable Length | 0.13M |
| Length | 0.13M |
Questions about this item
What charging standard does the USB-C port support and what power level does it cap at?
The USB-C port supports Power Delivery up to 60W at 20V/3A for charging laptops, tablets or phones while the adapter is in use.
How long is the cable and what connectors are on each end?
The cable is 0.13m long with a USB-C plug on one end and a combined USB-C PD port plus USB-A 2.0 female port on the other.
Is any driver or software required to use the OTG function?
No, the adapter is plug-and-play and requires no drivers or software installation for data transfer or charging.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



