We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

IHDAPP

IHDAPP OMS-M13 Bluetooth 5.3 Transmitter Receiver Wi-Fi adapter

SKU CH-WMX7-N3P58 MPN OMS-M13

A 2-in-1 Bluetooth 5.3 transmitter and receiver with an LED display, NFC pairing, a built-in 1000 mAh battery for up to 12 hours of use, and optical, coaxial, 3.5 mm AUX and RCA connections

  • TypeBluetooth Adapter
  • Bluetooth 5.3 chip delivers double the transmission speed and stable 20-metre range
  • 2-in-1 transmitter and receiver connects two smartphones simultaneously in RX mode
  • Crystal-clear LED display shows working status and Bluetooth modes at a glance
  • Multi-interface support with optical, coaxial, 3.5mm AUX and RCA via integrated DAC
  • Built-in 1000mAh battery provides up to 12 hours playback after a 1.5-hour charge

2-in-1 Bluetooth 5.3 Adapter

The IHDAPP OMS-M13 is a compact wireless adapter that functions as both a Bluetooth transmitter and receiver. It adds Bluetooth 5.3 connectivity to audio systems, TVs, PCs, and car stereos that lack built-in wireless support. The dual-mode design lets you stream audio from a source device to wired speakers or send TV audio to wireless headphones.

Thermals Noise and Power Draw

The unit runs on an internal 3.7V 1000mAh rechargeable lithium battery rated at 3.7W, drawing less than 40mA during operation. A full charge takes approximately 1.5 hours at roughly 1000mA current and delivers up to 10 hours in receive mode or 10 to 12 hours in transmit mode. With no active cooling, the device operates silently.

Upgrade Path and Compatibility

This adapter replaces wired-only connections by adding Bluetooth 5.3 to equipment with 3.5mm AUX, RCA, optical, or coaxial ports. It supports optical input sampling rates of 32, 44.1, 48, 96, and 192kHz at 24-bit depth and plays MP3, WAV, FLAC, and other common formats from USB storage up to 64GB. NFC tap-to-pair simplifies initial setup for compatible phones. It is not suited for users needing Wi-Fi networking, multi-room audio synchronisation, or aptX codec support.

Highlights

  • Bluetooth 5.3 chip delivers double the transmission speed and stable 20-metre range
  • 2-in-1 transmitter and receiver connects two smartphones simultaneously in RX mode
  • Crystal-clear LED display shows working status and Bluetooth modes at a glance
  • Multi-interface support with optical, coaxial, 3.5mm AUX and RCA via integrated DAC
  • Built-in 1000mAh battery provides up to 12 hours playback after a 1.5-hour charge

Specifications

BrandIHDAPP
ModelZ3#Q2724_B
TypeBluetooth Adapter

Questions about this item

How do I install the adapter and which step do users often miss?

Connect the adapter via 3.5mm AUX, RCA, optical or coaxial input, then press the M button to select TX or RX mode before pairing; the step users miss is setting the correct mode for their source device.

What maintenance or replacement will the adapter need later?

The built-in 1000mAh lithium battery is rechargeable and rated for up to 12 hours per charge; no user-replaceable parts are specified, so the battery will eventually require professional service.

What limit appears first during sustained use?

Battery life reaches approximately 10 hours in RX mode or 10-12 hours in TX mode before a 1.5-hour recharge is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.