IHDAPP
IHDAPP 15 Pin SATA Power Extension Cable 1 Male to 5 Female Splitter 24 inch 60cm
A 15-pin SATA power splitter cable provides one male connector and five female connectors to run multiple drives from a single power supply port.
- TypeSATA Cable
- ColorBlack
- Connector Detail15 Pin SATA Power Extension Hard Drive Cable 1 Male to 5 Fem
- Terminal GenderMale to Female
- Connect up to five drives from one PSU port
- 1 male to 5 female 15-pin SATA connectors
- 60 cm total length with staggered 10 cm leads
- 18 AWG tin-coated copper supports 3.3 V, 5 V and 12 V rails
- Self-adhesive tape included for tidy cable routing
Splitter for five SATA drives
This cable splits one 15-pin SATA power connector into five female connectors so a single PSU lead can feed multiple drives. It is built for builders who need extra power ports without adding modular cables.
24-inch total length with staggered drops
The 60 cm assembly uses 18 AWG tin-coated copper rated for 3.3 V, 5 V and 12 V rails. Five connectors are spaced at 20 cm then four 10 cm intervals so 2.5" SSDs and 3.5" HDDs in adjacent bays reach without strain.
Fits standard SATA power headers only
The male end plugs into any 15-pin SATA power socket from the supply while the female ends accept drives optical drives or PCIe cards with SATA power inputs. It does not work with non-SATA power ports and incorrect use will damage components.
Highlights
- Connect up to five drives from one PSU port
- 1 male to 5 female 15-pin SATA connectors
- 60 cm total length with staggered 10 cm leads
- 18 AWG tin-coated copper supports 3.3 V, 5 V and 12 V rails
- Self-adhesive tape included for tidy cable routing
Specifications
| Type | SATA Cable |
|---|---|
| Color | Black |
| Connector Detail | 15 Pin SATA Power Extension Hard Drive Cable 1 Male to 5 Female |
| Terminal Gender | Male to Female |
Questions about this item
Will the 15-pin SATA male connector plug into my existing power supply without an adapter?
The 15-pin SATA male connector fits directly into a standard power supply SATA port, so no extra adapter is needed for the PSU side.
How can I confirm the splitter is delivering power to all five drives after installation?
Each connected drive should spin up and be recognised by the BIOS or operating system, showing that 3.3 V, 5 V and 12 V rails are present on every female connector.
Does the package include mounting hardware such as screws or brackets for the drives?
The box contains the 60 cm splitter cable with one male and five female 15-pin connectors plus one piece of self-adhesive tape for cable routing.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



