We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PPR male thread socket fitting 20mm PN25

ifan

ifan S20×1/2 Male Thread Socket PPR Fitting 20mm PN25

SKU CH-WKKF-FZGA0

20 mm PPR male-thread socket fitting rated PN25 for hot and cold water up to 75 °C

  • TypeFitting & Connector Sets
  • Tube Size20mm
  • Item Count1 Carton
  • Thread Size20mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • 20mm PN25 rating handles up to 25 bar pressure
  • Male thread socket enables direct connection to 1/2 inch plumbing
  • PPR body resists corrosion in hot and cold water systems
  • Heat-fusion welding creates seamless leak-proof joints
  • Rated for continuous service up to 75°C water temperature

20 mm PN25 PPR Socket Fitting

This 20 mm PPR male-thread socket fitting connects piping at a PN25 pressure rating. It is designed for hot and cold water systems operating up to 75 °C. The corrosion-resistant body suits residential and light commercial plumbing installations. Builders needing a simple, leak-proof joint for PPR pipe will find it appropriate.

Heat-Fusion Installation

Installation uses socket heat fusion to create a seamless, leak-proof joint without sealants. A compatible fusion tool and correct heating time are essential to avoid cold joints or overheating. The smooth interior surface reduces flow obstruction once the joint cools. Misaligned pipe ends or insufficient fusion depth are the most common causes of leaks.

Sustained Pressure and Temperature Performance

The PPR body maintains structural integrity under continuous PN25 pressure and temperatures up to 75 °C. Corrosion and UV resistance prevent degradation during long service life. The smooth bore preserves consistent flow rates without scaling under prolonged thermal cycling. Systems exceeding the rated pressure or temperature range are not supported.

Highlights

  • 20mm PN25 rating handles up to 25 bar pressure
  • Male thread socket enables direct connection to 1/2 inch plumbing
  • PPR body resists corrosion in hot and cold water systems
  • Heat-fusion welding creates seamless leak-proof joints
  • Rated for continuous service up to 75°C water temperature

Specifications

TypeFitting & Connector Sets
Tube Size20mm
Item Count1 Carton
Thread Size20mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

How can I confirm the S20×1/2 male thread socket creates a leak-proof joint after heat-fusion installation?

After the socket cools, pressurise the line up to PN25 and inspect the weld bead; a uniform bead with no weeping at 20 mm tube size confirms a sound joint.

What comes in the carton and do I need a separate fusion tool?

The carton contains one PPR male-thread socket; a compatible 20 mm socket-fusion heater and pipe cutter must be purchased separately.

Which version should I choose for a 20 mm hot-water line rated to 75 °C?

Select the PN25-rated S20×1/2 socket; its PPR body handles 0–75 °C and 25 bar, matching the tube size and temperature requirement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.