We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical PPR pipe fitting with smooth finish, 25mm welding ends

ifan

ifan PPR Water Tube Fitting 25mm Welding PN25 0-75°C

SKU CH-XCYN-ES7PA

PPR water-tube fitting, 25 mm welding joint rated PN25 for 0-75 °C service

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • 25mm tube size matches standard plumbing installations
  • PN25 pressure rating handles demanding water systems
  • PPR body resists corrosion for long service life
  • 0-75°C range suits hot and cold water lines
  • Heat-fusion welding creates leak-proof seamless joints

25 mm PPR Pipe Connector

This 25 mm PPR fitting joins pipes by heat-fusion welding to create a seamless, leak-proof joint. It is rated PN25 for pressures up to 25 bar and operates from 0 to 75 °C. The corrosion-resistant body suits hot and cold water systems. Plumbers and DIY installers use it for permanent plumbing installations.

Replaces threaded or compression joints

Heat-fusion welding removes the need for separate sealants or mechanical threads that can loosen over time. The upgrade is worth it when a permanent, smooth-bore connection is required for consistent flow. It is not for systems that must be disassembled frequently or for pipes of a different diameter.

Welded installation with basic fusion tools

A socket or butt fusion tool heats the pipe and fitting, then they are pushed together to form a solid joint. The process is straightforward but requires a clean, square pipe cut and correct heating time. Misaligned or under-heated joints are the typical cause of leaks.

Highlights

  • 25mm tube size matches standard plumbing installations
  • PN25 pressure rating handles demanding water systems
  • PPR body resists corrosion for long service life
  • 0-75°C range suits hot and cold water lines
  • Heat-fusion welding creates leak-proof seamless joints

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

What pipe size does the 25mm welding end connect to?

The welding end is made for 25mm PPR pipe, matching the fitting's tube size.

How is the heat-fusion weld performed and what step is often missed?

Clean both socket and pipe, heat them together with a fusion tool, then push straight in without twisting; the common mistake is twisting during insertion, which weakens the joint.

When should the PPR fitting be inspected or replaced in a 0-75°C system?

PPR resists corrosion and scaling, so no routine replacement is needed; inspect only if a leak appears or after a major pressure event.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.