We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical PPR pipe fitting 25mm PN25 rating

ifan

ifan PPR Water Fitting 25mm PN25 0-75°C

SKU CH-TFFQ-S3V1J

A 25 mm PPR fitting rated PN25 for water systems operating from 0 to 75 °C with heat-fusion welding connections

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • Corrosion-resistant PPR body suits hot and cold water systems
  • Withstands temperatures up to 75 °C for hot water use
  • Heat-fusion welding creates seamless leak-proof joints
  • Smooth bore maintains constant unobstructed flow
  • Durable PPR resists chemicals and UV for long service life

25 mm PPR Fitting for Water Systems

This 25 mm PPR fitting connects plastic pipe in hot and cold water installations. It is rated PN25 for pressure and operates from 0 to 75°C. The ISO-listed body uses heat-fusion welding for a seamless joint. It suits plumbers and DIY installers who need a corrosion-resistant coupling.

Capacity and headroom for PN25 rating

The PN25 rating provides headroom for typical residential and light commercial water pressure. The 75°C upper limit covers standard hot-water circuits. The fitting runs out of headroom in high-pressure industrial mains or steam lines that exceed the rated pressure or temperature range.

Practical limits of heat-fusion welding

Heat-fusion welding requires a compatible socket or butt-fusion tool and clean, square-cut pipe ends. The joint cannot be disassembled once fused, so layout must be final. The smooth bore maintains flow but the fitting is not suited for threaded transitions or dissimilar materials without additional adapters.

Highlights

  • Corrosion-resistant PPR body suits hot and cold water systems
  • Withstands temperatures up to 75 °C for hot water use
  • Heat-fusion welding creates seamless leak-proof joints
  • Smooth bore maintains constant unobstructed flow
  • Durable PPR resists chemicals and UV for long service life

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

Will the 25 mm PPR fitting join cleanly to my existing 25 mm PPR pipe?

Yes — both the tube size and thread size are 25 mm, and the end connection is welding, so it fuses directly to matching 25 mm PPR pipe with a heat-fusion tool.

How can I verify the joint is leak-proof after fusion?

Pressurise the system up to PN25 and inspect the fused joint; a properly welded PPR connection shows no seepage and maintains pressure across the 0–75 °C range.

Does the carton include a heat-fusion tool or must I supply one?

The carton contains only the 25 mm PPR fitting (1 piece); a socket-fusion or butt-fusion tool is not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.