We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PPR pipe fitting 20mm PN25 rated for 75°C

ifan

ifan PPR Water Fitting 20mm PN25 75°C

SKU CH-AVYG-37B81

PPR plumbing fitting for 20 mm pipe, rated PN25 and 75 °C, joined by heat-fusion welding

  • TypeFitting & Connector Sets
  • Tube Size20mm
  • Item Count1 Carton
  • Thread Size20mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • 20 mm tube size fits standard plumbing layouts
  • PN25 pressure rating handles demanding hot and cold systems
  • Service temperature up to 75 °C suits residential hot water
  • PPR body resists corrosion and scale for long service life
  • Heat-fusion welding creates leak-proof joints without sealants

20 mm PPR Water Fitting

This 20 mm PPR fitting connects plastic pipe in hot and cold water systems. It is supplied as a single carton and joins by heat-fusion welding for a seamless joint. Plumbers and DIY installers use it for residential and light-commercial plumbing work.

PN25 pressure rating

The fitting is rated PN25, meaning it withstands a maximum pressure of 25 bar at the upper end of its temperature range. This single figure determines whether the part matches the design pressure of the installation.

75 °C sustained temperature

Under continuous load the fitting operates up to 75 °C without loss of structural integrity. The smooth interior surface maintains constant flow while the PPR body resists corrosion and chemical attack over long service life.

Highlights

  • 20 mm tube size fits standard plumbing layouts
  • PN25 pressure rating handles demanding hot and cold systems
  • Service temperature up to 75 °C suits residential hot water
  • PPR body resists corrosion and scale for long service life
  • Heat-fusion welding creates leak-proof joints without sealants

Specifications

TypeFitting & Connector Sets
Tube Size20mm
Item Count1 Carton
Thread Size20mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

What does the PN25 rating mean once the fitting is installed in a real plumbing system?

PN25 means the fitting is rated for a maximum working pressure of 25 bar at 20 °C, so it handles typical residential and light-commercial hot and cold water lines with a wide safety margin.

The spec lists ISO — what does that standard cover for this 20 mm PPR connector?

ISO certification confirms the fitting meets international dimensional and material requirements for PPR pipe systems, ensuring interchangeable socket dimensions and consistent fusion quality across approved brands.

How much straight 20 mm pipe do I need on each side to make a proper heat-fusion joint?

Allow at least the socket depth marked on the fitting plus clearance for the fusion tool jaws; the smooth bore keeps flow unrestricted once the joint cools.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.