We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PPR plastic thread elbow tee fitting, 25mm tube size

ifan

ifan PPR Thread Elbow Tee Tube Fitting 25mm PN25 0-75°C

SKU CH-41FX-FD8AA

A 25 mm PPR thread elbow tee fitting rated PN25 for water systems up to 75 °C

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • Corrosion-resistant PPR body handles PN25 pressure
  • Withstands 0-75°C range for hot and cold water
  • Heat-fusion welding creates seamless leak-proof joints
  • Smooth bore maintains steady unobstructed flow
  • Eco-friendly material certified to ISO standards

PPR Thread Elbow Tee 25 mm

This ifan fitting joins three 25 mm PPR pipes in a tee configuration with threaded connections. The body is moulded from PPR plastic rated to PN25 pressure and a 0-75 °C temperature range. Installation uses heat-fusion welding for a seamless, leak-proof joint. The smooth bore maintains unrestricted water flow in hot or cold systems.

Installers needing a corrosion-free equal tee

Suits plumbers assembling hot or cold water circuits where all three branches are 25 mm PPR and a threaded elbow tee is required. Not for installers working with metal pipe, different diameters, or systems exceeding the stated pressure and temperature limits. Buyers needing push-fit or compression ends should look at alternative connection types.

Rated PN25 at 75 °C maximum

The single specification that decides fit is the PN25 pressure rating combined with the 75 °C upper temperature limit. If the design pressure or temperature exceeds these values, the fitting is not suitable.

Highlights

  • Corrosion-resistant PPR body handles PN25 pressure
  • Withstands 0-75°C range for hot and cold water
  • Heat-fusion welding creates seamless leak-proof joints
  • Smooth bore maintains steady unobstructed flow
  • Eco-friendly material certified to ISO standards

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

Do I need a heat-fusion tool to join this 25 mm PPR tee to my pipe?

Yes, PPR fittings are joined by socket or butt fusion, so you need a compatible heat-fusion tool for the 25 mm size.

Can I mix this PN25 tee with lower-rated PPR pipe already in place?

The tee is rated PN25; the system pressure must not exceed the lowest-rated component, so verify the existing pipe rating first.

How can I confirm the joint is leak-free after fusion?

Pressurise the line with water up to the system design pressure and inspect the fused joint for any seepage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.