We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical PPR pipe fitting 25mm PN25 rating

ifan

ifan PPR Pipe Fitting 25mm PN25 White

SKU CH-Z41M-RKFB1

White PPR plumbing fitting for 25 mm pipe, rated PN25 and 0–75 °C with heat-fusion welding ends

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • PPR material resists corrosion in hot and cold water systems
  • Withstands temperatures up to 75°C for reliable hot water use
  • Heat fusion welding creates seamless leak-proof joints
  • Smooth bore maintains constant unobstructed water flow
  • ISO certified PN25 rating handles high pressure demands

25 mm PPR Fitting for PN25 Systems

This white PPR pipe fitting connects 25 mm tubes using a welded end connection. It is rated PN25 and operates from 0 to 75 °C, making it suitable for hot and cold water plumbing. The ISO-certified body material resists corrosion and chemicals for long service life. Installers seeking an eco-friendly coupling for standard pressure networks will find it fit for purpose.

Capacity and Pressure Headroom

The PN25 rating provides ample headroom for typical residential and light commercial water pressures well below 25 bar. The smooth interior bore maintains unobstructed flow across the 25 mm diameter without turbulence. At sustained temperatures above 75 °C the material approaches its limit, so steam or high-temperature process lines are outside the design envelope. The single-carton quantity suits one-off repairs or small installations rather than large-scale rollouts.

Heat-Fusion Installation Benefit

Socket or butt fusion creates a seamless, leak-proof joint that eliminates the need for separate sealants or threaded adapters. The corrosion-resistant PPR body ensures the fused connection remains structurally sound over time, even under UV exposure. Because the fitting is welded directly to the pipe, there are no mechanical threads to loosen or degrade. This method reduces installation time and removes a common failure point in pressurised water systems.

Highlights

  • PPR material resists corrosion in hot and cold water systems
  • Withstands temperatures up to 75°C for reliable hot water use
  • Heat fusion welding creates seamless leak-proof joints
  • Smooth bore maintains constant unobstructed water flow
  • ISO certified PN25 rating handles high pressure demands

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

Will the 25mm socket-fusion ends join cleanly to my existing 25mm PPR pipe without adapters?

Yes, the fitting is a 25mm equal coupling with welding ends designed for direct heat-fusion to 25mm PPR pipe.

How can I confirm the joint is leak-proof after heat-fusing the 25mm coupling?

Pressure-test the system up to PN25 once the joint has cooled; a sound fusion shows no pressure drop or visible seepage.

Does the single carton contain everything needed to install the 25mm fitting, or must I buy a fusion tool separately?

The carton supplies the PPR coupling only; a compatible socket-fusion welding tool must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.