We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PPR male tee fitting 25mm PN25 0-75°C

ifan

ifan male tee PPR fitting 25mm PN25 0-75°C

SKU CH-5PRM-BGPZV

Connects three 25 mm PPR pipes at up to PN25 pressure and 75 °C using heat-fusion welding for a leak-proof joint

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • PN25 rating handles demanding water pressure
  • Heat-fusion welding creates leak-proof joints
  • PPR body resists corrosion in hot and cold systems
  • Smooth bore maintains unrestricted flow at 75°C
  • Eco-friendly material gives long service life

25 mm PPR male tee fitting PN25

This 25 mm PPR male tee connects three pipe runs in hot and cold water systems. It handles pressures up to PN25 and operates between 0 and 75 °C. The PPR body resists corrosion and chemicals for long service life. Installation uses heat-fusion welding for a seamless, leak-proof joint.

Installers needing a corrosion-free branched joint

Suited for plumbers building potable-water networks that require a smooth interior and high-temperature tolerance. Not for installers who need threaded or compression connections instead of heat-fusion welding. Not for systems that exceed the stated pressure or temperature limits. Not for applications requiring metal-bodied fittings.

PN25 pressure rating

The PN25 rating defines the maximum working pressure this fitting can sustain at the rated temperature range. Exceeding this limit risks joint failure and leaks. Verify that your system design stays within PN25 before specifying this tee.

Highlights

  • PN25 rating handles demanding water pressure
  • Heat-fusion welding creates leak-proof joints
  • PPR body resists corrosion in hot and cold systems
  • Smooth bore maintains unrestricted flow at 75°C
  • Eco-friendly material gives long service life

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

Will the 25 mm PPR tee need periodic replacement of its weld joints?

The heat-fused weld joints become a single piece of PPR and do not require scheduled replacement; only physical damage or exposure beyond 75 °C would make replacement necessary.

What is the first limit reached if the fitting runs continuously at PN25 pressure?

The 75 °C temperature ceiling is the first hard limit; sustained pressure at PN25 is within the design envelope as long as the water stays at or below that temperature.

Does the 25 mm tee generate noise or heat when water circulates all day?

The PPR body is silent in operation and does not produce heat; it simply conveys water up to 75 °C without adding thermal load or vibration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.