We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass threaded elbow tee fitting with PN25 rating

ifan

ifan Brass Threaded Elbow Tee PN25 0-300°C

SKU CH-Z92Y-MB6T3

Forged brass elbow tee connects threaded pipe runs at angles, rated PN25 and 0-300°C for hot and cold water systems

  • TypeFitting & Connector Sets
  • Tube Size1/2-2INCH
  • Item Count1 Carton
  • Thread Size1/2-2INCH
  • End ConnectionsThreaded
  • Standards/CertificationsISO
  • Rated for PN25 pressure in demanding plumbing systems
  • Withstands continuous temperatures up to 300 °C
  • Brass body resists corrosion in hot and cold water
  • Threaded ends enable quick installation without special tools
  • Smooth bore maintains steady, unobstructed flow

Brass Threaded Elbow Tee PN25

This brass threaded elbow tee is a plumbing fitting designed to join three pipe sections at a right angle in water supply systems. It serves installers and maintenance engineers who need a durable, corrosion-resistant connector for hot or cold water lines. The forged brass body provides a smooth interior surface that maintains unobstructed flow and a long service life in residential or commercial installations. Eco-friendly construction supports sustainable plumbing practices.

Rated PN25 for 0–300°C service

The single specification that decides suitability is the pressure and temperature rating: PN25 maximum pressure across a 0–300°C range. This defines the safe operating envelope for the fitting in pressurised hot-water or heating circuits. ISO-standard manufacturing ensures consistent thread geometry and material quality. Select this part only when the system design stays within these pressure and temperature limits.

Threaded ends simplify assembly

Installation uses standard threaded connections in sizes from 1/2 to 2 inch, requiring only compatible pipe threads and appropriate sealant. The forged brass machines cleanly, so threads engage smoothly without galling when proper lubricant is applied. What usually goes wrong is over-tightening, which can stress the brass, or using mismatched thread standards that leak under pressure. Verify thread compatibility before assembly and torque to the fitting manufacturer’s recommendation.

Highlights

  • Rated for PN25 pressure in demanding plumbing systems
  • Withstands continuous temperatures up to 300 °C
  • Brass body resists corrosion in hot and cold water
  • Threaded ends enable quick installation without special tools
  • Smooth bore maintains steady, unobstructed flow

Specifications

TypeFitting & Connector Sets
Tube Size1/2-2INCH
Item Count1 Carton
Thread Size1/2-2INCH
End ConnectionsThreaded
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialBrass
Temperature Range0-300°C
FeaturesEco-Friendly

Questions about this item

What does the PN25 rating mean when this brass tee is installed in a plumbing system?

PN25 means the fitting is rated for a maximum working pressure of 25 bar, so it will safely handle typical domestic and light commercial water supplies up to that limit.

Which thread standard do the 1/2-2INCH connections follow, and what does it limit?

The threads are ISO-standard tapered pipe threads; they seal by thread engagement and limit the joint to the PN25 pressure rating and the 300 °C temperature ceiling.

What clearance and tools are needed to fit this equal tee into an existing brass pipe run?

You need enough space for the tee body and a pipe wrench or adjustable spanner to tighten each threaded end onto the matching male pipe threads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.