We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PPR plastic pipe fittings and connectors, 25mm size, PN25 rated for 0-75°C

ifan

ifan 25mm PPR Fitting & Connector Set, PN25, 0-75°C

SKU CH-KXHB-EHTWH

25mm PPR fitting set rated PN25 for hot and cold water systems up to 75°C

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • PPR body resists corrosion in hot and cold water
  • Rated PN25 for high-pressure plumbing systems
  • Operates from 0 to 75 °C for hot-water use
  • Heat-fusion welding creates leak-proof joints
  • Smooth bore maintains steady, unobstructed flow

25 mm PPR Fitting Set for PN25 Systems

This 25 mm PPR fitting and connector set is built for hot and cold water plumbing installations. The ISO-certified components use heat-fusion welding to create seamless, leak-proof joints. The eco-friendly PPR body resists corrosion, chemicals and UV exposure for long service life. It suits installers who need reliable joints up to PN25 pressure.

Replaces Threaded Metal Couplings in Hot Water Lines

The set replaces traditional threaded metal couplings where corrosion or scale build-up shortens service life. PPR’s smooth interior keeps flow unobstructed and handles continuous temperatures up to 75 °C without degradation. The jump is worth it when the system demands fused joints that cannot loosen under thermal cycling. It is not for installers who require detachable or compression-style connections.

Limited to Heat-Fusion Welding on 25 mm Pipe

The fittings only accept 25 mm pipe with matching 25 mm thread size and welded end connections. No push-fit, compression or solvent-cement methods are compatible with this material. The PN25 rating applies only when fusion is performed to the correct temperature and depth. Systems needing higher pressure classes or larger diameters cannot use this set.

Highlights

  • PPR body resists corrosion in hot and cold water
  • Rated PN25 for high-pressure plumbing systems
  • Operates from 0 to 75 °C for hot-water use
  • Heat-fusion welding creates leak-proof joints
  • Smooth bore maintains steady, unobstructed flow

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

What pipe diameter do the 25mm fittings connect?

The set joins 25mm PPR pipes using heat-fusion welding ends.

How are the fittings installed, and what step causes leaks?

Heat both pipe and fitting to fusion temperature, then insert fully without twisting; twisting misaligns the joint and creates leak paths.

When should the PPR joints be inspected or replaced?

PPR resists corrosion and scaling, so joints typically last the system lifetime; inspect only if pressure drops or water quality changes appear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.