We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PPR female tee fitting 25mm PN25 0-75°C

ifan

ifan 25mm PPR Female Tee Fitting PN25 0-75°C

SKU CH-DFQX-Q6B9J

25 mm PPR female tee fitting rated PN25 for hot and cold water systems up to 75 °C

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • Corrosion-resistant PPR body suits hot and cold water systems
  • Withstands continuous operating temperatures up to 75°C
  • Heat-fusion welding creates seamless leak-proof joints
  • Smooth interior surface maintains unobstructed water flow
  • Rated PN25 for high-pressure plumbing installations

25 mm PPR Tee for Hot and Cold Water

This 25 mm PPR female tee connects three pipe ends of the same diameter in a single fitting. It is designed for residential or light-commercial plumbing where a branch line is required. The PPR body resists corrosion and chemical attack in both hot and cold water circuits.

Heat-Fusion Weld Ends and PN25 Rating

Each outlet uses a 25 mm socket for heat-fusion welding, creating a seamless, leak-proof joint without threads or sealants. The PN25 pressure rating supports typical municipal and pumped supply pressures encountered in standard installations. The smooth interior surface maintains consistent flow and reduces sediment build-up.

Temperature Limit and Single-Fitting Pack

The fitting operates continuously between 0 °C and 75 °C, so it is unsuitable for steam lines or sustained temperatures above 75 °C. It is supplied as a single fitting per carton, so projects requiring multiple tees will need additional cartons. The ISO certification confirms baseline material and dimensional compliance.

Highlights

  • Corrosion-resistant PPR body suits hot and cold water systems
  • Withstands continuous operating temperatures up to 75°C
  • Heat-fusion welding creates seamless leak-proof joints
  • Smooth interior surface maintains unobstructed water flow
  • Rated PN25 for high-pressure plumbing installations

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

What pipe size and pressure rating does the PN25 tee support?

The tee is built for 25 mm pipe and rated to PN25 for both hot and cold water service.

What clearance is needed to socket-fuse a 25 mm branch on this tee?

Allow enough space around each 25 mm socket for the fusion tool to seat fully without hitting adjacent walls or fittings.

How do I join the tee to PPR pipe and which step causes leaks?

Heat both the pipe end and the tee socket with a fusion tool, then push them together squarely; the common mistake is twisting during insertion, which misaligns the melt and creates a leak path.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.