We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical PPR pipe fitting with smooth finish and welding ends, 25 mm diameter, rated PN25 0-75 °C

ifan

ifan 25 mm PPR Pipe Fitting Welding PN25 0-75 °C

SKU CH-DMCD-Y6ENX

25 mm PPR pipe fitting for welding PN25 hot and cold water systems up to 75 °C

  • TypeFitting & Connector Sets
  • Tube Size25mm
  • Item Count1 Carton
  • Thread Size25mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • Welded joints eliminate leaks on 25 mm pipework
  • PN25 rating handles high-pressure hot and cold systems
  • PPR body resists corrosion and chemical attack
  • Smooth bore maintains unrestricted flow for decades
  • Heat-fusion installation creates seamless connections in minutes

25 mm PPR Fitting for Hot and Cold Water

This 25 mm PPR pipe fitting joins water tubes by heat fusion welding. The body material is PPR, which resists corrosion in both hot and cold water systems. It is suited for installers who need a leak-proof joint on 25 mm pipework. Buyers looking for threaded or push-fit connections will not find them here.

Check Pipe Size and Welding Equipment

Verify that the existing pipework uses a 25 mm outside diameter before ordering. The end connections require a socket-fusion or butt-fusion tool to create the welded joint. Ensure the system design operates within the PN25 pressure rating and the stated temperature limits. Projects that need a different diameter or a mechanical joint type cannot use this fitting.

Sustained Load Behaviour Up to 75 °C

The PPR material maintains structural integrity under continuous pressure up to PN25 across the 0-75 °C range. The smooth interior surface preserves a constant flow rate without scaling or corrosion buildup over time. Resistance to environmental factors and UV radiation supports a long service life in permanent installations. Systems that exceed the temperature ceiling will fall outside the rated performance envelope.

Highlights

  • Welded joints eliminate leaks on 25 mm pipework
  • PN25 rating handles high-pressure hot and cold systems
  • PPR body resists corrosion and chemical attack
  • Smooth bore maintains unrestricted flow for decades
  • Heat-fusion installation creates seamless connections in minutes

Specifications

TypeFitting & Connector Sets
Tube Size25mm
Item Count1 Carton
Thread Size25mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

What fittings come in the 25 mm PPR carton and what else is needed to join them?

The carton contains 25 mm PPR equal-coupling fittings for heat-fusion welding. You will need a compatible socket-fusion or butt-fusion welding tool to make the joints.

How do I choose between the PN25 and other pressure ratings for a 25 mm line?

Select the PN25 version when the system design pressure is up to PN25; lower-rated fittings would not meet that requirement.

What does the 75 °C upper limit mean for daily hot-water use?

The fitting is rated for continuous water temperatures up to 75 °C, so it suits standard domestic hot-water circuits operating at or below that temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.