We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PPR thread union fitting 20mm PN25 75°C

ifan

ifan 20mm PPR Thread Union Fitting PN25 0-75°C

SKU CH-3FHY-KKF3G

Connects 20 mm PPR pipe with a 1/2" female thread, rated PN25 for 0–75 °C water systems

  • TypeFitting & Connector Sets
  • Tube Size20mm
  • Item Count1 Carton
  • Thread Size20mm
  • End ConnectionsWelding
  • Standards/CertificationsISO
  • PN25 rating handles high-pressure systems reliably
  • PPR body resists corrosion in hot and cold water
  • Withstands temperatures up to 75°C for hot water use
  • Heat-fusion welding creates leak-proof seamless joints
  • Smooth interior surface maintains constant unobstructed flow

20 mm PPR Thread Union for PN25 Systems

This fitting connects 20 mm PPR pipe to a 1/2 inch female thread using heat-fusion welding. It is intended for plumbers and installers building hot or cold water circuits that must meet PN25 pressure requirements.

Welded Joint Installation

The union is joined by socket or butt fusion, creating a seamless, leak-proof bond without additional sealants. Correct heating time and alignment are critical; insufficient fusion or angular misalignment are the most common causes of joint failure.

Sustained Pressure and Temperature Performance

Rated for continuous operation up to 75 °C at PN25, the PPR body resists creep and maintains structural integrity under long-term load. The smooth bore prevents scaling that could otherwise increase friction losses over extended service periods.

Highlights

  • PN25 rating handles high-pressure systems reliably
  • PPR body resists corrosion in hot and cold water
  • Withstands temperatures up to 75°C for hot water use
  • Heat-fusion welding creates leak-proof seamless joints
  • Smooth interior surface maintains constant unobstructed flow

Specifications

TypeFitting & Connector Sets
Tube Size20mm
Item Count1 Carton
Thread Size20mm
End ConnectionsWelding
Standards/CertificationsISO
Maximum PressurePN25
Body MaterialPPR
Temperature Range0-75°C
FeaturesEco-Friendly

Questions about this item

How do I verify the 20mm PPR thread union is sealing correctly after heat-fusion installation?

Pressurise the line up to PN25 and inspect the fused joint for leaks; the smooth interior surface should maintain unobstructed flow at temperatures up to 75°C.

What comes in the carton and what must I supply myself?

The carton contains one 20mm PPR thread union fitting; you must provide the PPR pipe, a compatible heat-fusion tool and any thread-sealing tape for the 1/2F connection.

Which PN25 20mm PPR thread union should I choose for hot water up to 75°C?

Select the ISO-certified 20mm PPR thread union rated PN25 with a 0-75°C temperature range; its corrosion-resistant body and equal-coupling design suit both hot and cold water systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.