IETS GT202UB vacuum laptop cooler with temperature display, 13 wind speeds 2600-5000RPM
Vacuum laptop cooler with temperature display and 13 wind speeds from 2600 to 5000 RPM
- Accessory Type43201619
- ColorGT202UB
- Maximum support size8"
- Dimension4.699 cm x 10.795 cm x 18.6944 cm
- Fan Numbers1
- Fan SizeAir vents within 3.3/3.4/4.6 inches
- Rapid cooling with 2600-5000 RPM high-speed blower
- Automatic fan control via intelligent temperature detection
- Secure fit with retractable clip arm and three shroud sizes
- Dust-proof net reduces internal buildup for longer life
- Compact 0.249 kg design fits vents up to 4.6" x 1.6
Vacuum laptop cooler with temperature display
The IETS GT202UB is a vacuum-style laptop cooler designed for gaming notebooks that exhaust heat through side or rear vents. It clamps directly over the vent using a retractable clip arm and one of three supplied silicone shrouds to create a sealed airflow path. A built-in sensor reads exhaust temperature and automatically adjusts the single blower across 13 speed steps. The unit weighs 0.249 kilograms and measures 4.699 cm by 10.795 cm by 18.6944 cm.
Compatibility limits for side or rear vents
The cooler only works when the laptop vent dimensions fall within 4.6 inches wide by 1.6 inches high and the surrounding surface is flat enough for the adhesive mount. Shroud sizes correspond to air-vent openings of 3.3, 3.4 or 4.6 inches. If the vent sits on the rear panel, the screen angle stops at about 135 degrees. Laptops without a suitable side or rear exhaust, or with curved chassis near the vent, cannot use this cooler.
Upgrade from passive pads and low-RPM blowers
Traditional cooling pads typically spin below 1000 RPM and rely on loose airflow under the chassis. The GT202UB replaces them with a 2600 to 5000 RPM blower, a sealed silicone shroud and a low-resistance duct that pulls hot air directly from the exhaust port. The jump is worth it when thermal throttling appears under load and the laptop meets the vent-size and flat-surface requirements. Buyers whose machines lack a compatible vent or need multi-device flexibility should look elsewhere.
Highlights
- Rapid cooling with 2600-5000 RPM high-speed blower
- Automatic fan control via intelligent temperature detection
- Secure fit with retractable clip arm and three shroud sizes
- Dust-proof net reduces internal buildup for longer life
- Compact 0.249 kg design fits vents up to 4.6" x 1.6
Specifications
| Brand | IETS |
|---|---|
| Model | GT202UB |
| Part Number | GT202UB |
| Accessory Type | 43201619 |
| Color | GT202UB |
| Maximum support size | 8" |
| Dimension | 4.699 cm x 10.795 cm x 18.6944 cm |
| Fan Numbers | 1 |
| Fan Size | Air vents within 3.3/3.4/4.6 inches |
| Specifications | Acrylonitrile Butadiene Styrene (ABS), 1, Air, 0.249 kilograms, 4.699 L x 10.795 W x 18.6944 H centimeters, GT202UB, IETS |
| Sports Team | 1 Piece |
| Features | Air, 1 |
| Package Contents | false |
Questions about this item
Which size of the three silicon shrouds should I choose for my laptop?
Measure your exhaust vent; the shrouds cover vents up to about 4.6" long by 1.6" high, so pick the one that fully covers your vent without overhang.
What does the 5000 RPM maximum actually do once the cooler is attached?
The high-speed blower pulls hot air directly from the laptop's vent through a low-resistance duct, delivering far more airflow than typical coolers that spin under 1000 RPM.
How does the vacuum-seal connection affect compatibility with my laptop's vent?
The retractable clip arm and adhesive mount create a tight seal on flat surfaces beside vents up to 4.6" wide; rear vents will hold the lid at roughly 135 degrees.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



