Ideal
Ideal 300110800 T-Bolt Hose Clamp SAE 228 8 in Min hand tool
Stainless-steel T-bolt clamp adjusts from 8 in to 8 5/16 in and installs at 75 in-lb torque
- TypeClamps
- T-bolt design delivers 75 in-lb install torque for secure sealing
- 301 stainless-steel band resists corrosion at .025 in thickness
- 304 stainless-steel screw provides lasting strength through repeated adjustments
- SAE 228 rating confirms compliance with recognised industry standard
- 3/4 in band width distributes clamping force evenly across hose
Ideal T-Bolt Hose Clamp SAE 228
This stainless steel T-bolt clamp provides a secure seal for hoses requiring an 8 inch minimum inside diameter. It suits maintenance technicians and vehicle owners working on fluid transfer connections. The 301 grade band and 304 grade screw resist corrosion in demanding environments. Packaged as a five-count set for multiple installation points.
Check hose diameter and torque tool before ordering
Verify the hose outer diameter falls within the 8 inch minimum and 8 5/16 inch maximum inside diameter range. Ensure a 7/16 inch hex driver or socket is available for the screw head. Confirm the application requires SAE 228 size specification. The clamp installs at 75 in-lb torque for proper sealing pressure.
Stainless construction handles heat and vibration
The 301 stainless band and 304 stainless screw withstand temperature cycling and mechanical vibration without loosening. Band thickness of .025 inch and 3/4 inch width distribute clamping force evenly across the hose surface. The T-bolt design maintains consistent tension during thermal expansion and contraction cycles. No moving parts generate noise during operation.
Highlights
- T-bolt design delivers 75 in-lb install torque for secure sealing
- 301 stainless-steel band resists corrosion at .025 in thickness
- 304 stainless-steel screw provides lasting strength through repeated adjustments
- SAE 228 rating confirms compliance with recognised industry standard
- 3/4 in band width distributes clamping force evenly across hose
Specifications
| Brand | Ideal |
|---|---|
| Model | 300110800 |
| Type | Clamps |
Questions about this item
What comes in the pack of Ideal 300110800 T-Bolt Hose Clamps and is any extra hardware required?
The pack contains five stainless-steel T-bolt clamps; no additional hardware is needed because each clamp has an integrated 7/16 in hex head for tightening.
Which SAE size should I choose for a hose that measures about 8 in inside diameter?
Choose the SAE 228 clamp, which adjusts from a minimum of 8 in to a maximum of 8 5/16 in inside diameter.
What does the 75 in-lb install torque mean when I tighten the clamp on the vehicle?
It is the maximum recommended tightening torque; applying 75 in-lb with a torque wrench on the 7/16 in hex secures the 301 stainless band without over-stressing the 304 stainless screw.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
