We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
iDatalink HRN-HRR-TO2 harness with ADS-MRR module, black connectors and wiring

iDatalink

iDatalink HRN-HRR-TO2 Radio Replacement Harness with ADS-MRR Module

SKU CH-1730-MWWQ6

Radio replacement harness for select 2012-2020 Toyotas that retains steering wheel controls, factory amp and backup camera when adding an aftermarket stereo

  • TypeHarness
  • FeaturesRequires Maestro ADS-MRR or ADS-MRR2 module
  • Retains steering wheel audio controls with any stereo
  • Retains factory amplifier with any stereo
  • Retains fader control with iDatalink-ready stereos
  • Retains aux input and backup camera
  • Displays performance data and gauges on touchscreen with select iDatalink-ready receivers

Harness for Toyota 2012‑2020 installs

The iDatalink HRN-HRR-TO2 harness connects an aftermarket stereo to select 2012‑2020 Toyota models when paired with a Maestro ADS-MRR or ADS-MRR2 module. It preserves steering wheel audio controls and the factory amplifier with any compatible receiver. Fader control, vehicle‑settings menus, aux input and backup camera are retained on supported units. The harness plugs into the vehicle wiring without cutting or splicing.

Plug‑and‑play installation with module requirement

The harness uses factory connectors for a direct fit, eliminating wire splicing. A Maestro ADS-MRR or ADS-MRR2 module must be purchased and flashed separately for the harness to function. Most installers find the physical connections straightforward, but forgetting to programme the module for the specific vehicle is the common error. Optional brand‑specific radio adapters simplify the head‑unit side of the install.

Owners keeping factory features on 2012‑2020 Toyotas

This kit suits drivers upgrading the stereo in a compatible Toyota while retaining steering wheel controls, amplifier output and vehicle‑personalisation menus. It is not for vehicles outside the 2012‑2020 Toyota range listed in the application guide. Buyers who cannot supply or flash the required Maestro module should look at a different solution. Installers unwilling to configure the module via PC will also need an alternative.

Highlights

  • Retains steering wheel audio controls with any stereo
  • Retains factory amplifier with any stereo
  • Retains fader control with iDatalink-ready stereos
  • Retains aux input and backup camera
  • Displays performance data and gauges on touchscreen with select iDatalink-ready receivers

Specifications

BrandiDatalink
TypeHarness
FeaturesRequires Maestro ADS-MRR or ADS-MRR2 module

Questions about this item

How can I verify the harness and module are working after installation?

Test steering wheel audio controls, confirm the factory amplifier powers the speakers, check that the fader adjusts front-to-rear balance, and ensure the vehicle settings menu and backup camera display appear on the new stereo.

What comes in the box and what must I purchase separately?

The box contains the HRN-HRR-TO2 vehicle harness and the ADS-MRR interface module. You must buy a Maestro RR or RR2 module and a head unit adapter for your specific aftermarket stereo brand.

Should I select the ADS-MRR or ADS-MRR2 module for my vehicle?

The harness works with both Maestro ADS-MRR and ADS-MRR2 modules. Choose the module that lists your specific vehicle make, model, and year in its compatibility chart.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.