IBM
IBM 90Y8751 600 GB 10000 RPM SAS 2.5" switch module
A refurbished 600 GB 10,000 RPM SAS hard drive in a 2.5 inch hot-swap form factor
- Electrical Outlet Plug TypeHard Drive
- 600 GB capacity stores large datasets
- 10000 RPM spindle speed accelerates data access
- 6Gb/s SAS interface enables fast transfers
- 5-inch hot-swap form factor simplifies maintenance
- Refurbished condition offers cost-effective enterprise storage
600 GB 10K RPM SAS Hot-Swap HDD
This refurbished IBM 90Y8751 is a 600 GB 2.5-inch internal hard drive spinning at 10000 RPM. It connects through a 6Gb/s SAS interface and supports hot-swap insertion in compatible bays. The drive is built for enterprise storage arrays and server chassis that accept 2.5-inch SAS devices.
Suited for SAS arrays needing 600 GB capacity
Administrators expanding or repairing 6Gb/s SAS storage pools will find the correct form factor and spindle speed here. Systems limited to other interface types or requiring larger single-drive capacities cannot use this module. Buyers needing solid-state performance or a different physical size should look elsewhere.
6Gb/s SAS interface determines compatibility
The drive communicates exclusively over 6Gb/s SAS, so the host backplane or controller must support that exact standard. Without a matching SAS connection the drive will not function, regardless of available 2.5-inch bays.
Highlights
- 600 GB capacity stores large datasets
- 10000 RPM spindle speed accelerates data access
- 6Gb/s SAS interface enables fast transfers
- 5-inch hot-swap form factor simplifies maintenance
- Refurbished condition offers cost-effective enterprise storage
Specifications
| Brand | IBM |
|---|---|
| Electrical Outlet Plug Type | Hard Drive |
| Shipping weight | 0.91 kg |
| Package size | 203 × 102 × 51 mm |
Questions about this item
What server or storage enclosure accepts a 2.5" SAS hot-swap drive?
Any system with a 2.5-inch SAS hot-swap bay and a 6 Gb/s SAS backplane will accept the 90Y8751.
Will the 10000 RPM SAS drive work on an older 3 Gb/s SAS controller?
The 6 Gb/s SAS interface negotiates down to 3 Gb/s, so the drive functions on legacy controllers at the lower speed.
How do I verify the 600 GB drive is recognised and healthy after installation?
Check the RAID controller BIOS or OS disk utility for the correct 600 GB capacity, 10000 RPM spindle and a SMART status showing no errors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



