We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
IBM 44T1412 slimline adapter card with USB port

IBM

IBM 44T1412 Remote Supervisor Adapter II Slimline Card

SKU CH-7ZZR-JXCWR

Provides remote server management via USB cabling using Telnet protocol

  • Remote management via Telnet protocol
  • USB cabling simplifies server connection
  • Slimline form factor fits tight chassis
  • Adds accelerated graphics to supported systems
  • Lightweight design at 5.1 units

IBM 44T1412 Remote Supervisor Adapter II

This slimline card provides remote management for compatible IBM servers using a USB cabling interface and the Telnet protocol. It adds accelerated graphics capabilities for console redirection and is designed for administrators who need out-of-band access to hardware.

Suits admins needing Telnet remote access via USB

Buyers who require SSH encryption or IPMI support should look elsewhere, as the adapter uses Telnet for its management protocol. It is also unsuitable for systems lacking the specific slimline slot or USB cabling infrastructure this card requires.

USB cabling type defines host connectivity

The card connects to the host system through a USB cabling interface, which dictates installation compatibility. Verify that your server supports this specific connection method before purchase, as other interface types will not work with this module.

Highlights

  • Remote management via Telnet protocol
  • USB cabling simplifies server connection
  • Slimline form factor fits tight chassis
  • Adds accelerated graphics to supported systems
  • Lightweight design at 5.1 units

Specifications

BrandIBM

Questions about this item

What server slot or connector must my system provide for the 44T1412 to install?

The card is a slimline form-factor module; it fits the dedicated Remote Supervisor Adapter slot found on supported IBM xSeries and System x servers.

Does the USB cabling on the 44T1412 let me keep using an older KVM switch that only has PS/2 ports?

The adapter’s cabling type is USB, so a PS/2-only KVM would need a USB-to-PS/2 converter or a KVM that accepts USB console connections.

After fitting the 44T1412, how can I confirm remote management is active?

Open a Telnet session to the adapter’s IP address; a login prompt from the Remote Supervisor Adapter II firmware shows the card is operating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.