IBM
IBM 00AJ146 1.20 TB 10K SAS 2.5" Hard Drive
A 1.20 TB 10000 rpm SAS hard drive in a 2.5 inch form factor for IBM System X servers
- Electrical Outlet Plug TypeHard Drive
- 2 TB capacity stores large datasets
- 10000 rpm spindle speed accelerates data access
- 6Gb/s SAS interface enables fast server connectivity
- 5 inch form factor fits dense drive bays
- Compatible with IBM System X x3850 X6 and x3950 X6 servers
1.20 TB 10K SAS 2.5" Server Hard Drive
This 1.20 TB 10000 rpm SAS drive is built for internal server storage. It connects via a 6Gb/s SAS interface in a 2.5 inch form factor. The drive is supplied new and carries Lenovo part number 00AJ146. It is designed for compatible IBM System X servers.
Suits IBM System X x3850 X6 and x3950 X6
This drive fits IBM System X x3850 X6 and x3950 X6 servers that accept 2.5 inch 6Gb/s SAS drives. It is not for systems that lack a SAS backplane or drive bay. It is not for workloads that need a larger capacity than 1.20 TB. It is not for laptop or desktop installations.
6Gb/s SAS Interface Standard
The single specification that decides fit is the 6Gb/s SAS interface standard. The server must support this exact interface to recognise and use the drive. A different interface will prevent installation. Compatibility is limited to the listed IBM System X models.
Highlights
- 2 TB capacity stores large datasets
- 10000 rpm spindle speed accelerates data access
- 6Gb/s SAS interface enables fast server connectivity
- 5 inch form factor fits dense drive bays
- Compatible with IBM System X x3850 X6 and x3950 X6 servers
Specifications
| Brand | Lenovo |
|---|---|
| Electrical Outlet Plug Type | Hard Drive |
Questions about this item
What server or controller must I already have to use the 6Gb/s SAS interface on this drive?
You need a server or RAID controller with a 6Gb/s SAS backplane or HBA that accepts 2.5" drives.
Will this 1.20 TB 10K SAS drive work in an older IBM System x that only supports 3Gb/s SAS?
Yes, the 6Gb/s SAS drive will negotiate down to 3Gb/s on an older backplane, but it will run at the lower speed.
How can I verify the drive is running at its full 10000 rpm and 6Gb/s link after installation?
Check the server management console or RAID utility for a reported spindle speed of 10000 rpm and a negotiated link rate of 6Gb/s SAS.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



