iBallz
iBallz C14 to NEMA 5-15R Power Adapter 10A 250V 2 Pack
Converts a C14 inlet to a NEMA 5-15R outlet, rated 10 A at 250 V with 18 AWG conductors, sold as a two-pack
- Converts C14 plug to standard US outlet
- Supports up to 10A at 250V for 2500W loads
- 18 AWG conductors handle 2.5 kW payload
- Two adapters included for multiple devices or spares
- Compact 7.3 cm by 3.8 cm design fits tight spaces
Two-pack C14 to NEMA 5-15R adapters
These adapters convert an IEC 60320-C14 inlet to a standard NEMA 5-15R outlet. Each unit measures 7.3 by 3.8 centimetres and uses 18 AWG conductors rated for 10 amps at 250 volts. The black plastic and metal housing carries UL certification plus RoHS and REACH compliance. Two adapters are included in the package.
IT teams adapting C14 inlets to US plugs
They suit racks, PDUs or UPS units that present a C14 male connector while the attached gear uses a NEMA 5-15 plug. They do not change voltage or current, so devices that only accept a single input voltage cannot use them. Buyers needing a step-down or step-up transformer should look elsewhere.
10 A 250 V rating with no voltage conversion
The 10 amp, 250 volt rating sets the maximum safe load at 2500 watts. Because the adapter passes mains voltage through unchanged, the connected equipment must already support the local supply voltage. Check the device label before plugging in.
Highlights
- Converts C14 plug to standard US outlet
- Supports up to 10A at 250V for 2500W loads
- 18 AWG conductors handle 2.5 kW payload
- Two adapters included for multiple devices or spares
- Compact 7.3 cm by 3.8 cm design fits tight spaces
Specifications
| Brand | zdyCGTime |
|---|
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



