IAPOS P1 Pro 60000mAh Carbon power bank
60,000 mAh lithium-polymer power bank charges five devices simultaneously via two USB-A, one USB-C and a built-in 3-in-1 cable with a 22.5 W maximum output and digital percentage display
- Type60000 milliamp_hours
- ColorCarbon
- Compatible Phone ManufactureriPhone 16/16pro/16 pro max/iPhone 15/15pro/15 pro max/iPhone
- Compatible Phone ModeliPhone 16/16pro/16 pro max/iPhone 15/15pro/15 pro max/iPhone
- Capacity60000 milliamp_hours
- Chemicallithium_polymer
- 60000mAh capacity provides up to 10 full iPhone charges for extended trips
- 5W maximum output charges compatible devices to 60% in 30 minutes
- Five devices charge simultaneously via two USB-A, one USB-C and a built-in 3-in-1 cable
- Integrated LCD display shows exact remaining battery percentage at a glance
- Compact 5.9 x 2.8 x .97 in design weighs only 370 grams for easy portability
60000mAh power bank for multi-device charging
The IAPOS P1 Pro packs a 60000mAh lithium-polymer cell into a carbon-coloured case measuring 5.9 in by 2.8 in by .97 in and weighing 370 grams. It is built for users who need days of backup power for phones, tablets and smaller USB gadgets while travelling, camping or during grid outages.
Integrated 3-in-1 cable and five output ports
A tethered cable with USB-C, Lightning and Micro-USB tips plus two USB-A ports and one USB-C port let you charge up to five devices at once. The bank supports PD, QC, SCP, FCP and AFC protocols, delivering up to 22.5W so a compatible phone can reach 60 percent in 30 minutes, and an LCD readout shows the exact remaining percentage.
Check your wall charger and cable for 18W input
Recharging the bank takes roughly 7 hours when you use an 18W fast wall charger and a compatible fast-charging cable; slower adapters will take longer. Verify that your devices can accept the listed output standards, and note that the unit cannot power laptops or other high-draw equipment.
Highlights
- 60000mAh capacity provides up to 10 full iPhone charges for extended trips
- 5W maximum output charges compatible devices to 60% in 30 minutes
- Five devices charge simultaneously via two USB-A, one USB-C and a built-in 3-in-1 cable
- Integrated LCD display shows exact remaining battery percentage at a glance
- Compact 5.9 x 2.8 x .97 in design weighs only 370 grams for easy portability
Specifications
| Brand | IAPOS |
|---|---|
| Model | P1 Pro |
| Type | 60000 milliamp_hours |
| Color | Carbon |
| Part Number | P1 Pro |
| Compatible Phone Manufacturer | iPhone 16/16pro/16 pro max/iPhone 15/15pro/15 pro max/iPhone 14/14 pro/14 pro max/iPhone 13/13 pro/13 pro max/iPhone 12/12 pro/12 pro max |
| Compatible Phone Model | iPhone 16/16pro/16 pro max/iPhone 15/15pro/15 pro max/iPhone 14/14 pro/14 pro max/iPhone 13/13 pro/13 pro max/iPhone 12/12 pro/12 pro max |
| Capacity | 60000 milliamp_hours |
| Chemical | lithium_polymer |
| Amp | 3 amps |
| Dimension | 5.9 in x 2.8 in x 0.97 in |
| Weight | 370 grams |
Questions about this item
How often will the built-in 3-in-1 cable need replacing if used daily?
The integrated cable is fixed to the unit and cannot be swapped out; if a connector fails the whole power bank must be replaced.
Which output hits its limit first when all five ports are loaded continuously?
The USB-C output caps at 22 W and each USB-A at 22.5 W, so total simultaneous draw is shared across those fixed ceilings.
How warm does the case get and what is the fan noise during a full 7-hour recharge?
The unit has no fan; it relies on passive cooling, so it runs silently while the casing warms under the 18 W input load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MCHOSE Adjustable Tablet/Phone Stand Aluminum Black 4-13 inch
- Tablet Stands



