We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 120 mm square case fan 25 mm thick with four-pin connector

Hyper Fan

Hyper Fan 12025 12V 5.5A 43W 220 CFM 6200 RPM 63 dBA 4-Pin

SKU CH-3S9X-XTSNG

A 120 mm case fan moves 220 CFM at 6200 RPM with a 43 W draw and 63 dBA noise

  • TypeCase Fan
  • High airflow of 220 CFM for demanding cooling
  • 6200 RPM speed moves large air volume quickly
  • 43 W power draw at 12 V and 5.5 A
  • Double bearing design supports sustained high-speed operation
  • 4-pin PWM interface enables precise motherboard control

High-Speed 120mm Case Fan

The Hyper Fan 12025 is a 12V DC case fan built for systems that demand maximum airflow. It delivers 220 CFM at 6200 RPM using a 4-pin mainboard interface. This component suits builders who need aggressive cooling in a standard 120mm mounting footprint.

Thermals Noise and Power

The fan draws 5.5A with an actual measured current of 3.6A, consuming 43W during operation. It produces a noise level of 63 dBA at full speed, reflecting its high-performance design. A double-bearing structure supports the 120x120x25mm frame for sustained rotation.

Included Accessories Impact

The unit ships with a 12cm wire lead connecting directly to a 4-pin header. No additional mounting hardware or software utilities are mentioned in the specifications. The short cable length may restrict routing options in larger chassis. Buyers who need longer cables or PWM control software should verify compatibility separately.

Highlights

  • High airflow of 220 CFM for demanding cooling
  • 6200 RPM speed moves large air volume quickly
  • 43 W power draw at 12 V and 5.5 A
  • Double bearing design supports sustained high-speed operation
  • 4-pin PWM interface enables precise motherboard control

Specifications

TypeCase Fan

Questions about this item

How do I install the 120 mm fan using the 4-pin mainboard connector?

Mount the 120 mm frame with standard case screws, then plug the 12 cm 4-pin cable into a PWM header so the motherboard controls the 6200 RPM maximum speed.

When will the double bearing need replacement?

The double bearing design runs at 6200 RPM; expect service intervals of several years, but listen for rising noise above the rated 63 dBA as a replacement cue.

What thermal limit appears first during continuous 43 W operation?

Sustained 43 W draw at 5.5 A peaks (actual 3.6 A) pushes the motor windings to their temperature ceiling before airflow drops from the rated 220 CFM.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.